Auto Parts Search
We have info for following modifications of 1999 Plymouth Grand Voyager
- 1999 Plymouth Grand Voyager 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:3
- 1999 Plymouth Grand Voyager 3.3 V6 GAS, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:R
- 1999 Plymouth Grand Voyager 3.8 V6 GAS, CID:230, Fuel Injection, Aspiration:230, Engine VIN:, Desg:L
- 1999 Plymouth Grand Voyager 3.3 V6 FLEX, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:G
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Computer Relearn Procedures -> DaimlerChrysler -> 1999-2002 Dakota, Durango, Ram Pick-Up & Ram Van -> 1999-2004 -> Controller Anti-Lock Brakes (CAB) -> Engine Performance -> Except 1999-2002 -> Light Truck & Vans -> Pinion Factor Procedure -> Powertrain Control Module (PCM) -> Sentry Key Immobilizer System (SKIS) -> Shift Quality -> Theft Alarm -> Transaxle Quick Learn Procedure
Vehicle: 1999 Plymouth Grand Voyager 3.3 V6 FLEX
Powertrain Control Module (PCM)
Except 1999-2002
If battery cable has been disconnected, the PCM must relearn a new operating strategy. Connect battery cable and run engine until operating temperature is reached. After engine warm-up, drive vehicle under various operating conditions until PCM has relearned new strategy.
1999-2004
Anytime the PCM is replaced the VIN and vehicle mileage must be programmed into the new PCM. If the PCM is not programmed, Diagnostic Trouble Codes (DTCs) will set. To program the PCM, connect a DRB or suitably programmed ...
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Trucks & Vans -> Mode Door Actuators -> 1998-99 Full Size Vans -> Blend/Air Door -> Cherokee -> Dakota & Durango -> Defrost, Floor & Panel/Demist Door -> Defrost/Demist, Floor & Panel Door -> Floor/Panel Door -> Full Size Pickups & Grand Cherokee -> Heat/Defrost Door -> Heater/Defrost Door -> Minivans -> Panel/Defrost Doors -> Recirculation Door -> Wrangler
Vehicle: 1999 Plymouth Grand Voyager 3.8 V6 GAS
Cherokee
Recirculation Door
A recirculation door actuator is only used on models equipped with A/C.
- Remove kick cover from heater and A/C housing, then disconnect vacuum harness connector.
- Insert a suitable wide flat blade tool into latch hole on heater and A/C housing actuator mount to release.
- Pull firmly outward on actuator to remove, then position actuator as required to disengage from hole.
- Remove actuator from vehicle.
- Reverse procedure to install.
Defrost, Floor & Panel/Demist Door
-
...
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Air Bag System Precautions -> DaimlerChrysler -> Disarming -> 1990-97 -> 1994-96 Cherokee -> 1998-2004 -> Except 1994-96 Cherokee -> Light Trucks & Vans -> Passenger Cars
Vehicle: 1999 Plymouth Grand Voyager 3.0 V6 GAS
Passenger Cars
1990-97
It may be required to access and record all Diagnostic Trouble Codes (DTCs) prior to disarming the air bag system.
- Place ignition switch in Lock position.
- Disconnect and isolate battery ground cable.
- Wait at least two minutes after disconnecting battery ground cable before doing any further work on vehicle. The air bag system is designed to retain enough voltage to deploy air bags for a short time even after battery has been disconnected.
1998-2004
It may be required to access and rec...
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Compressor Service -> Model 10PA17 & 10PA17C Compressors -> Compressor Clutch, Replace -> Inspection -> Installation -> Removal
Vehicle: 1999 Plymouth Grand Voyager 3.0 V6 GAS
Removal
Although the compressor must be removed from its mount in order to replace the clutch assembly, it is not necessary to recover A/C refrigerant.
- Using a suitable band type oil filter wrench to prevent clutch plate rotation, remove compressor shaft bolt, Fig. .
- Using a suitable plastic hammer, tap clutch plate, then remove plate and shims, Fig. .
- Remove pulley retaining ring using snap ring tool No. C-4574, or equivalent, then slide pulley off compressor. Do not pry on clutch plate or pulley.
- Remove clutch coil wire br...
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Air Bag System Precautions -> DaimlerChrysler -> Arming -> 1990-97 -> 1994-96 Cherokee -> 1998-2004 -> Except 1994-96 Cherokee -> Light Truck & Vans -> Passenger Cars
Vehicle: 1999 Plymouth Grand Voyager 3.8 V6 GAS
Passenger Cars
1990-97
- Ensure no one is inside vehicle and ignition switch is in Lock position.
- Connect battery ground cable.
- Turn ignition switch to On position from passenger side of vehicle.
- The SRS warning lamp should light for six to eight seconds, then remain off for at least 45 seconds to indicate if SRS is functioning properly.
1998-2004
- Ensure no one is inside vehicle and ignition switch is in Lock position.
- Connect battery ground or remote cable or terminal.
- Turn ignition On from a safe position be...
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Plymouth Grand Voyager AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Plymouth Grand Voyager cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Trucks & Vans -> Heater & A/C Control Unit, Replace -> 1998-99 Full Size Vans -> Cherokee & Wrangler -> Dakota & Durango -> Full Size Pickups -> Grand Cherokee -> Minivans
Vehicle: 1999 Plymouth Grand Voyager 3.0 V6 GAS
Cherokee & Wrangler
- Remove instrument panel bezel using a suitable wide blade flat tool and pry bezel away from instrument panel, then lower down glove box door.
- Reach through glove box opening and disconnect vacuum harness .
- Remove control panel attaching screws and pull control unit far enough away to disconnect electrical connectors and control cables.
- Remove control unit.
- Reverse procedure to install.
Dakota & Durango
- Using a suitable wide flat blade tool, pry cluster bezel away from instrument panel, Fig....
CLICK HERE TO GET FULL ACCESS TO 1999 Plymouth Grand Voyager A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Plymouth Grand Voyager vehicle. |
Access the Complete guide! |