Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Cadillac Allante car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Cadillac Allante automobile. Try the Automotix DIY solution today!
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Cadillac Allante AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Cadillac Allante cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1991 Cadillac Allante 4.5 V8 GAS
- Disconnect battery ground cable.
- Remove accessory drive belt.
- Remove upper front bolt.
- Remove radiator.
- Raise and suitably support vehicle.
- Remove front engine splash shield.
- Loosen rear alternator bracket from engine.
- Remove top bolt.
- Remove front lower mounting bolt.
- Remove lower rear mounting bolt.
- Remove upper rear mounting bolt.
- Remove duct from back of alternator.
- Disconnect regulator electrical connectio...
CLICK HERE TO GET FULL ACCESS TO 1991 Cadillac Allante STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Cadillac Allante AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Cadillac Allante cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1991 Cadillac Allante 4.5 V8 GAS
If shims are required between starter and engine block, they should be placed in original position during installation. If starter is noisy during cranking, remove double .015 inch shim or add .015 inch shim at outer bolt only. If high pitched whine is observed after engine starts, ...
CLICK HERE TO GET FULL ACCESS TO 1991 Cadillac Allante STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Cadillac Allante vehicle.
|
| Access the Complete guide! |
