Auto Parts Search
![Get Full Access](/images/get-full-access.gif)
We have info for following modifications of 1991 Pontiac Grand AM
- 1991 Pontiac Grand AM 2.5 L4 GAS, CC:2474, CID:151, Fuel Injection, Aspiration:151, Engine VIN:, Desg:U
- 1991 Pontiac Grand AM LE 2.3 L4 GAS, CID:138, Fuel Injection, Aspiration:138, Engine VIN:, Desg:D
- 1991 Pontiac Grand AM LE 2.5 L4 GAS, CC:2474, CID:151, Fuel Injection, Aspiration:151, Engine VIN:, Desg:U
- 1991 Pontiac Grand AM LE 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:A
- 1991 Pontiac Grand AM SE 2.3 L4 GAS, CID:138, Fuel Injection, Aspiration:138, Engine VIN:, Desg:D
- 1991 Pontiac Grand AM SE 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:A
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM LE 2.5 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM 2.5 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM LE 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM SE 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM SE 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac Grand AM LE 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |