Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Oldsmobile Silhouette car and truck
repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 Oldsmobile Silhouette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1992 Oldsmobile Silhouette
- 1992 Oldsmobile Silhouette 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:L
- 1992 Oldsmobile Silhouette 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:D
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI Anti-Lock Brake System -> Description -> System Operation
Vehicle: 1992 Oldsmobile Silhouette 3.8 V6 GAS
System Operation
This braking system, Fig. , is designed to reduce the occurrence of wheel lock-up during severe braking conditions. To accomplish this function, the system regulates hydraulic brake line pressure when a microprocessor, located inside the Electronic Brake Control Module (EBCM), determines one or more of the wheels is about to lose traction during braking. The EBCM will allow the hydraulic modulator to change brake pressures several times each second to provide maximum vehicle control. This system cannot increase brake pressure above the master cylinder pressure appl...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 1992 Oldsmobile Silhouette 3.1 V6 GAS
Master Cylinder
- On models with manual brake system, disconnect master cylinder pushrod from brake pedal.
- On all models, disconnect all wire connector...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Anti-lock Brakes -> Rear Wheel Anti-Lock Brake System -> System Service -> 1992 -> 1993-95 -> Anti-Lock Pressure Valve (APV) -> Brake System Bleed -> C & K Series -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Electronic Control Unit (ECU) -> Isolation/Dump Valve Assembly -> Manual Bleeding -> Pressure Bleeding -> Vehicle Control Module (VCM) -> Vehicle Speed Sensor
Vehicle: 1992 Oldsmobile Silhouette 3.8 V6 GAS
Brake System Bleed
1992
Before bleeding the brakes, the front and rear displacement cylinder pistons must be returned to the top most position. Using a TECH 1 or equivalent scan tool, enter manual control function and apply the front and rear motors. Ensure enable relay is on.
Use only DOT 3 brake fluid from a clean and sealed container. Do not use DOT 5 brake fluid.
Pressure Bleeding
- Remove master cylinder cover, ensure reservoir is properly filled.
- Connect bleeder adapter tool No. J 35589, or equivalent, to master cylinder reservoir.
- Connect bleeder adapter to pressure bleeding equipm...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI Anti-Lock Brake System -> System Service -> ABS Hydraulic Modulator & Master Cylinder Assembly -> ABS Hydraulic Modulator Gears -> ABS Hydraulic Modulator Solenoid Assembly -> ABS Lamp Driver Module -> Accelerometer -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Enable Relay -> Front Wheel Speed Sensor -> Left Front Wheel Speed Sensor Jumper Harness -> Lumina APV, Silhouette & Trans Sport -> Manual Bleeding -> Pressure Bleeding -> Rear Speed Sensor Wiring Harness -> Rear Wheel Speed Sensor -> Tracker
Vehicle: 1992 Oldsmobile Silhouette 3.8 V6 GAS
Brake System Bleed
Pressure Bleeding
Lumina APV, Silhouette & Trans Sport
- Remove master cylinder cover, ensure reservoir is properly filled.
- Connect bleeder adapter tool No. J 35589, or equivalent, to master cylinder reservoir.
- Connect bleeder adapter to pressure bleeding equipment.
- Connect a clear plastic bleeder hose to modulator assembly rearward bleeder valve, submerge other end of hose into clean container partially filled with brake fluid.
- Adjust pressure bleeding equipment to 5-10 psi, then wait for approximately 30 seconds to insure there is no leakage.
- Adjust pressure bleed equi...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI Anti-Lock Brake System -> Precautions -> General Service Precautions
Vehicle: 1992 Oldsmobile Silhouette 3.8 V6 GAS
General Service Precautions
Avoid contact with brake fluid when servicing the anti-lock brake syste...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile Silhouette AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Oldsmobile Silhouette cars and light trucks from 1990+.
Power Brake Units -> Delco-Moraine Brake Boosters -> General Service
Vehicle: 1992 Oldsmobile Silhouette 3.1 V6 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, be sure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the bra...
CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1992 Oldsmobile Silhouette vehicle.
|
| Access the Complete guide! |
