Auto Parts Search
We have info for following modifications of 1993 Honda Accord
- 1993 Honda Accord LX 2.2 L4 GAS, CC:2156, Fuel Injection
- 1993 Honda Accord SE 2.2 L4 GAS, CC:2156, Fuel Injection
- 1993 Honda Accord DX 2.2 L4 GAS, CC:2156, Fuel Injection
- 1993 Honda Accord EX 2.2 L4 GAS, CC:2156, Fuel Injection
- 1993 Honda Accord 10TH Anniversary 2.2 L4 GAS, CC:2156, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 1993 Honda Accord EX 2.2 L4 GAS
Removal
- Refer to Figs. and when replacing brake shoes.
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Loosen parking brake, then remove rear brake drums.
- Remove tension pins by pushing retainer springs while turning.
- Lower brake shoe assembly being careful not to damage wheel cylinder dust cover, then remove lower return spring.
- Disconnect parking brake cable from parking brake lever, then remove brake shoe assembly.
- Remove upper return spring, self-adjuster lever and spring, then separate brake shoes.
- Remove wave washer, parking brake lever and pivot pin from...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 1993 Honda Accord EX 2.2 L4 GAS
Front
Removal
- Refer to Figs. through when replacing brake pads.
- Raise and support front of vehicle, then remove wheel and tire assemblies.
- Remove brake hose clamp bolts from steering knuckle, Fig. .
- Remove caliper bolt, then swing caliper up out of the way.
- Remove shims, retainers and brake pads.
Installation
- Using vernier caliper, measure thickness of each pad lining. Compare measurement with specifications. If brake lining thickness is less than specified, replace both pads as a set.
- Clean caliper thoroughly, and check for grooves or cracks. Repair or replace as necessary.
- I...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1993 -> 1993 Accord -> 1994-96 -> 1994-96 Accord -> Accord -> Accumulator -> Accumulator Disposal -> Brake Fluid Change -> Brake System Bleed -> Civic -> Civic & Civic del Sol -> Civic del Sol -> Civic, Civic del Sol, Prelude & 1993 Accord -> Component Replacement -> Control Unit -> Front -> Front Speed Sensor -> Modulator -> Odyssey -> Odyssey & 1994-96 Accord -> Power Unit -> Prelude -> Prelude & 1993 Accord -> Pulser & Sensor Gap Measurement -> Rear -> Rear Speed Sensor -> System Pressure Relief
Vehicle: 1993 Honda Accord DX 2.2 L4 GAS
System Pressure Relief
Odyssey & 1994-96 Accord
- Remove bleeder cap from maintenance bleeder on modulator unit, then attach a suitable wrench to bleeder.
- Connect a rubber tube to bleeder and place other end in a container, Fig. .
- While holding tube in hand, loosen maintenance bleeder 1/8 to 1/4 turn and collect fluid in container. Do not loosen bleeder too much; brake fluid is under high pressure and can burst out.
- Tighten maintenance bleeder to specification.
Civic, Civic del Sol, Prelude & 1993 Accord
- Drain brake fluid from master cylinder and modulator reservoir thoroug...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 1993 Honda Accord 10TH Anniversary 2.2 L4 GAS
The vacuum assist diaphragm assembly multiplies the force exerted on the master cylinder piston in order to increase the hydraulic pressure delivered to the wheel cylinders. The assembly also decreases the effort necessary to obtain acceptable stopping performance. Vacuum assist units get their energ...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 1993 Honda Accord 10TH Anniversary 2.2 L4 GAS
Removal
- Refer to Figs. and when replacing brake shoes.
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Loosen parking brake, then remove rear brake drums.
- Remove tension pins by pushing retainer springs while turning.
- Lower brake shoe assembly being careful not to damage wheel cylinder dust cover, then remove lower return spring.
- Disconnect parking brake cable from parking brake lever, then remove brake shoe assembly.
- Remove upper return spring, self-adjuster lever and spring, then separate brake shoes.
- Remove wave washer, parking brake lever and pivot pin from...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Accord AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Accord cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1993 Honda Accord SE 2.2 L4 GAS
Do not mix different brands of brake fluid, as they may not be compatible. Use only DOT 3 or 4 brake fluid.
Ensure brake fluid level in reservoir is at MAX (upper) level line.
- Have an assistant slowly pump brake pedal several times, then hold steady pressure.
- Loosen brake bleed screw to allow air to es...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Accord BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Honda Accord vehicle. |
Access the Complete guide! |