Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Hyundai Elantra car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Hyundai Elantra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Hyundai Elantra
- 1994 Hyundai Elantra 1.6 L4 GAS, CC:1596, Fuel Injection, Engine VIN:, Desg:R
- 1994 Hyundai Elantra 1.8 L4 GAS, CC:1836, Fuel Injection, Engine VIN:, Desg:M
- 1994 Hyundai Elantra GL 1.6 L4 GAS, CC:1596, Fuel Injection, Engine VIN:, Desg:R
- 1994 Hyundai Elantra GLS 1.8 L4 GAS, CC:1836, Fuel Injection, Engine VIN:, Desg:M
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1994 Hyundai Elantra GL 1.6 L4 GAS
- Fill master cylinder reservoir with brake fluid.
- Using a suitable length and diameter of vinyl hose, insert end of hose into a container full of brake fluid.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake ped...
CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Except Sonata w/Bendix System -> Master Cylinder Overhaul -> Sonata w/Bendix System
Vehicle: 1994 Hyundai Elantra 1.8 L4 GAS
Master Cylinder Overhaul
Except Sonata w/Bendix System
On Scoupe models, do not remove proportioning valves from master cylinder unless master cylinder replacement is necessary.
- Remove reservoir cap, drain brake fluid into a suitable container, then remove reservoir from master cylinder, Figs. through .
- Remove snap ring while depressing piston with a blunt tool. If necessary, secure master cylinder in a suitable soft jawed vise.
- On all models except Sonata, remove primary and secondary pistons from master cylinder body. Do not disassemble primary and seco...
CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1993 -> 1994-96 -> Basic Diagnosis -> Description -> Diagnosis Using Self-Diagnostic Mode -> Diagnostic Tests -> Preliminary Inspection -> System Circuit Inspection
Vehicle: 1994 Hyundai Elantra GLS 1.8 L4 GAS
Description
If a malfunction occurs, the diagnostic system will identify the problem and the ECU will store the codes. At the same time, the system informs the driver of a malfunction with the ABS warning lamp.
Preliminary Inspection
Start engine and drive at a speed of 3-6 mph, then verify that the modulator is operating by listening for motor pump hum and solenoid clicking for one or two seconds. Procedure should be performed within first three minutes after start up. Solenoid valve and motor pump cycling takes place between 3 and 6 mph, as long as brake is not applied.
Basic ...
[[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Accent, Excel & Scoupe -> Assemble -> Disassemble -> Elantra & Sonata -> Front -> Installation -> Rear -> Removal
Vehicle: 1994 Hyundai Elantra GL 1.6 L4 GAS
Accent, Excel & Scoupe
Removal
- Remove brake pads as outlined previously.
- Disconnect and cap brake line(s).
- Remove caliper attaching bolts and caliper assembly from steering knuckle.
Disassemble
- Remove sleeve, sleeve boot and pin boots, Fig. .
- Protect fingers with shop towel, then blow piston from caliper bore with compressed air.
- Remove piston boot, then pry piston seal from caliper bore using a suitable screwdriver.
Assemble
- Clean all components with suitable cleaner.
- Inspect caliper bore, piston and carrier for damage or excessive wear.
- Apply rubber grease to new piston seal, then ...
CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Accent, Elantra, Excel & Sonata -> Inspection -> Installation -> Removal -> Scoupe
Vehicle: 1994 Hyundai Elantra 1.8 L4 GAS
Scoupe
Removal
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove brake drum, then automatic adjuster spring and lever.
- Remove shoe-to-shoe spring and hold-down spring, Fig. .
- Remove parking brake cable from parking brake lever.
- Remove clip from parking brake cable at backing plate, then brake line from wheel cylinder.
- Remove wheel cylinder assembly with backing plate.
Inspection
- Check backing plate for wear or damage. Replace as necessary.
- Check wheel cylinder for fluid leakage. Repair or replace cylinder as necessary.
- Inspect brake lining and drum for proper contact...
CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Hyundai Elantra cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Replacement
Vehicle: 1994 Hyundai Elantra 1.6 L4 GAS
- Remove master cylinder as outlined under "Component Replacement" in "Hydraulic Brake System."
- Disconnect vacuum hose.
- From inside vehicle, separat...
CLICK HERE TO GET FULL ACCESS TO 1994 Hyundai Elantra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Hyundai Elantra vehicle.
|
| Access the Complete guide! |
