Auto Parts Search
1996 Oldsmobile Silhouette CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Oldsmobile REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Oldsmobile Silhouette car and truck
repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Oldsmobile Silhouette automobile. Try the Automotix DIY solution today!
A/C & HEATER SERVICE PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Cooling Fans -> Light Duty Trucks & Vans -> System Diagnosis & Testing -> C, K, G & P Series -> Lumina APV, Silhouette, Trans Sport & Venture -> Tracker
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
Lumina APV, Silhouette, Trans Sport & Venture
Refer to Figs. and for diagnosis and testing procedures. If a fan blade is bent or damaged, replace the blade assembly. Do not attempt to repair and use a damaged fan blade again.
C, K, G & P Series
Refer to Figs. through for diagnosis and testing procedures.
Tracker
When dia...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Disc Brakes -> Delco-Moraine Single Piston Caliper -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Installation -> Removal
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
Removal
- Siphon enough brake fluid out of the master cylinder to bring fluid level to 1/3 full to avoid fluid overflow when the caliper piston is pushed back into its bore.
- Raise and support vehicle, remove front wheels.
- Using a C-clamp, Fig. , push piston back into its bore.
- Remove two mounting bolts and lift caliper away from disc.
Inspection
Should it become necessary to remove the caliper for installation of new parts, clean all parts in denatured alcohol, wipe dry using lint-free cloths. Using compressed air, blow out drilled passages and holes. Check dust boots for punctures or t...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
General Motors Corp./Saturn Light Trucks, SUVs & Vans -> Component Locations -> 1990-96 Lumina APV, Silhouette & Trans Sport
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
Front
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove engine splash shield.
- Insert a suitable drift or punch through brake caliper and into brake rotor to prevent wheel hub and bearing from turning.
- Remove wheel drive shaft spindle nut.
- Remove stabilizer shaft link.
- Disconnect outer tie rod end from steering knuckle. Do not loosen tie rod end jam nut.
- Disconnect wheel speed sensor electrical connector, then reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129, or equival...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Starter, Replace
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Disconnect electrical connections at starter.
- Remove starter motor mounting bolts and shims, if required...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
General Motors Corp./Saturn Trucks -> Service Throttle Soon Indicator Lamp ->
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
A "Service Throttle Soon" indicator lamp is mounted in the lower righthand instrument cluster corner on these models. It lights when the ignition is turned On, but should go out approximately 1-5 seconds after the engine starts.
Traditional throttle cables are no longer used on these models. The PCM receives signals from an electron...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
Inlet
- Remove air cleaner.
- Drain cooling system into a suitable container.
- Remove heater hose support clamp bolt.
- Reposition heater core inlet hose clamp at engine.
- Remove hose from engine.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS
- Disconnect battery ground cable.
- Remove belt shield bolt and shield.
- Lift or...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1996 Oldsmobile Silhouette AUTOMOBILES
Component location diagrams for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. from 1990+.
 Convenience Center & RH I/P Components Diagram for 1996 Oldsmobile Silhouette 3.4 V6 GASComponents on diagram: |
 Rear Of Engine Compartment Diagram for 1996 Oldsmobile Silhouette 3.4 V6 GASComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1996 Oldsmobile Silhouette AUTOMOBILES
OEM drawn wiring diagrams for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S.
 1996 Oldsmobile Silhouette 3.4 V6 GAS Wiring DiagramComponents on diagram: |
 1996 Oldsmobile Silhouette 3.4 V6 GAS Wiring DiagramComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1996 Oldsmobile Silhouette AUTOMOBILES
OEM TSB listings for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. from 1985+.
|
Document: Revised General Motors New Vehicle Tire Warranty Program Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS Auto Systems: |
|
Document: New Website for AFIT, TPM, and VDR Updates Vehicle: 1996 Oldsmobile Silhouette 3.4 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1996 Oldsmobile Silhouette AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1996 Oldsmobile Silhouette cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Silhouette SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Oldsmobile Silhouette vehicle.
|
| Access the Complete guide! |
