Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Jeep Cherokee car and truck
repair procedures including Jeep engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Jeep Cherokee automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1990 Jeep Cherokee
- 1990 Jeep Cherokee 2.5 L4 GAS, CID:150, Fuel Injection, Aspiration:150, Engine VIN:, Desg:E
- 1990 Jeep Cherokee 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:L
- 1990 Jeep Cherokee Laredo 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:L
- 1990 Jeep Cherokee Pioneer 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:L
- 1990 Jeep Cherokee Limited 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:L
- 1990 Jeep Cherokee Sport 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:L
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Anti-Lock Brake System Warning Lamp -> Jeep
Vehicle: 1990 Jeep Cherokee Limited 4.0 L6 GAS
Red and yellow indicator lamps are used to warn of system faults. The red lamp warns of such faults as low brake fluid level, parking brake On, system pressure differential and other system faults. The red indicator lamp should light for approximately two seconds during engine starting and should go off, unless parking brake is applied or a problem in the brake system exist. The red indicator lamp should reset after repairs to system have been completed and system has returned to normal o...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Anti-Lock Brake System Warning Lamp -> Jeep
Vehicle: 1990 Jeep Cherokee Laredo 4.0 L6 GAS
Red and yellow indicator lamps are used to warn of system faults. The red lamp warns of such faults as low brake fluid level, parking brake On, system pressure differential and other system faults. The red indicator lamp should light for approximately two seconds during engine starting and should go off, unless parking brake is applied or a problem in the brake system exist. The red indicator lamp should reset after repairs to system have been completed and system has returned to normal o...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Anti-Lock Brake System Warning Lamp -> Jeep
Vehicle: 1990 Jeep Cherokee 4.0 L6 GAS
Red and yellow indicator lamps are used to warn of system faults. The red lamp warns of such faults as low brake fluid level, parking brake On, system pressure differential and other system faults. The red indicator lamp should light for approximately two seconds during engine starting and should go off, unless parking brake is applied or a problem in the brake system exist. The red indicator lamp should reset after repairs to system have been completed and system has returned to normal o...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> 1990 Comanche, Cherokee, Wagoneer & Wrangler
Vehicle: 1990 Jeep Cherokee 2.5 L4 GAS
The emission maintenance timer will light an instrument cluster indicator lamp when vehicle mileage has reached 82,500 miles. At this time, the oxygen sensor and PCV valve should be replaced, in addition to the other required emission maintenance schedule for this mileage.
If the timer should fail before vehicle has accumulated 82,500 miles, the timer and oxygen sensor should both be replaced to maintain a proper sensor replacement interval.
After performing the required service, replace the emission maintenance timer as follows:
- On Comanche, Cherokee...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> 1990 Comanche, Cherokee, Wagoneer & Wrangler
Vehicle: 1990 Jeep Cherokee Sport 4.0 L6 GAS
The emission maintenance timer will light an instrument cluster indicator lamp when vehicle mileage has reached 82,500 miles. At this time, the oxygen sensor and PCV valve should be replaced, in addition to the other required emission maintenance schedule for this mileage.
If the timer should fail before vehicle has accumulated 82,500 miles, the timer and oxygen sensor should both be replaced to maintain a proper sensor replacement interval.
After performing the required service, replace the emission maintenance timer as follows:
- On Comanche, Cherokee...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Jeep Cherokee AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Jeep Cherokee cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> 1990 Comanche, Cherokee, Wagoneer & Wrangler
Vehicle: 1990 Jeep Cherokee 4.0 L6 GAS
The emission maintenance timer will light an instrument cluster indicator lamp when vehicle mileage has reached 82,500 miles. At this time, the oxygen sensor and PCV valve should be replaced, in addition to the other required emission maintenance schedule for this mileage.
If the timer should fail before vehicle has accumulated 82,500 miles, the timer and oxygen sensor should both be replaced to maintain a proper sensor replacement interval.
After performing the required service, replace the emission maintenance timer as follows:
- On Comanche, Cherokee...
CLICK HERE TO GET FULL ACCESS TO 1990 Jeep Cherokee MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Jeep Cherokee vehicle.
|
| Access the Complete guide! |
