Auto Parts Search
We have info for following modifications of 1990 Oldsmobile 98
- 1990 Oldsmobile 98 Regency 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:C
- 1990 Oldsmobile 98 Regency Brougham 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:C
- 1990 Oldsmobile 98 Regency Touring 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:C
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Oldsmobile 98 Regency 3.8 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Remove engine cover.
- Remove rear pencil brace bolts.
- Remove brace.
- Remove alternator mounting bolts.
- Remove output terminal nut.
- Disconnect electrical connector.
- Remove alternat...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Oldsmobile 98 Regency 3.8 V6 GAS
When removing starter, note if any shims are used between the starter and mounting surface. If shims are found, reinstall in original locations.
If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after engine start, add .01...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Oldsmobile 98 Regency Touring 3.8 V6 GAS
When removing starter, note if any shims are used between the starter and mounting surface. If shims are found, reinstall in original locations.
If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after engine start, add .01...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Oldsmobile 98 Regency Brougham 3.8 V6 GAS
When removing starter, note if any shims are used between the starter and mounting surface. If shims are found, reinstall in original locations.
If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after engine start, add .01...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Oldsmobile 98 Regency Touring 3.8 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Remove engine cover.
- Remove rear pencil brace bolts.
- Remove brace.
- Remove alternator mounting bolts.
- Remove output terminal nut.
- Disconnect electrical connector.
- Remove alternat...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Oldsmobile 98 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Oldsmobile 98 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Oldsmobile 98 Regency Brougham 3.8 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Remove engine cover.
- Remove rear pencil brace bolts.
- Remove brace.
- Remove alternator mounting bolts.
- Remove output terminal nut.
- Disconnect electrical connector.
- Remove alternat...
CLICK HERE TO GET FULL ACCESS TO 1990 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Oldsmobile 98 vehicle. |
Access the Complete guide! |