1990 Subaru Justy Brake Service (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Subaru Justy car and truck repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1990 Subaru Justy automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1990 Subaru Justy

  • 1990 Subaru Justy DL 1.2 L3 GAS, CC:1189, Carburetor, Engine VIN:, Desg:7
  • 1990 Subaru Justy GL 1.2 L3 GAS, CC:1189, Carburetor, Engine VIN:, Desg:8
  • 1990 Subaru Justy GL 1.2 L3 GAS, CC:1189, Fuel Injection, Engine VIN:, Desg:7
  • 1990 Subaru Justy GL 1.2 L3 GAS, CC:1189, Fuel Injection, Engine VIN:, Desg:8

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, ANTI-LOCK BRAKES -> TROUBLESHOOTING
Vehicle: 1990 Subaru Justy DL 1.2 L3 GAS

Refer to Figs. through for ABS troubleshooting procedures. The ABS control unit receives and sends signals that control system functions. It is impo...

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, DRUM BRAKES -> TIGHTENING SPECIFICATIONS
Vehicle: 1990 Subaru Justy GL 1.2 L3 GAS

[[table data]]

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, HYDRAULIC BRAKE SYSTEMS -> DUAL PROPORTIONING VALVE REPLACEMENT
Vehicle: 1990 Subaru Justy GL 1.2 L3 GAS

Inspect brake line connections at DPV for fluid leakage. If leakage is found tighten lines or replace DPV.

  • Disconnect brake line flare nuts at all six connections from DPV.
  • Remove retaining ...

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, DISC BRAKES -> BRAKE PADS REPLACEMENT -> FRONT -> REAR
Vehicle: 1990 Subaru Justy DL 1.2 L3 GAS

FRONT

Refer to Figs. through when performing the following procedure.

  • Raise and support vehicle.
  • Remove front wheels.
  • On all except Justy, Legacy and SVX, remove outer parking brake cable clip and disconnect cable.
  • On Legacy Turbo & SVX models, disconnect brake hose from strut.
  • On all except Justy with 12 inch wheels, remove caliper lockpin, then rotate caliper on guide pin.
  • On Justy with 12 inch wheels, remove caliper-to-support retaining bolts, then the boot protector and caliper.
  • On all models, remove brake pads from support.
  • Reverse procedure to install noting the following:
    • ...

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, ANTI-LOCK BRAKES -> SYSTEM BLEEDING -> 1990-91 MODELS -> 1992 EXCEPT SVX MODELS -> SVX MODELS
Vehicle: 1990 Subaru Justy GL 1.2 L3 GAS

1990-91 MODELS

  • Bleed air from brake lines of primary side as if you were changing a master cylinder.
  • Bleed air from secondary side by replacing cone screw with a bleeder Fig. .
  • Depress brake pedal and intermittently apply AV signal to magnet valve. Do not apply signal for more than five seconds.
  • Release pedal at end of stroke. Repeat until air disappears, then repeat normal bleeding operations. Bleed air from other secondary circuits following above procedure.
  • To produce a AV signal disconnect terminals from battery, then hydraulic connectors 2P and 12P, Refer to Fig. .
  • Connect 12P hy...

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1990 Subaru Justy AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Subaru Justy cars and light trucks from 1990+.

SUBARU, ANTI-LOCK BRAKES -> COMPONENT TESTING -> CHECK G SENSOR CIRCUIT -> CHECK RELAYS -> CHECK VALVE RELAYS -> HYDRAULIC UNIT SOLENOID -> INPUT SIGNAL OF SENSOR TO ABS CONTROL UNIT -> POWER SUPPLY VOLTAGE TO ABS CONTROL UNIT -> SIGNAL EMITTED FROM SENSOR ABS CONTROL UNIT -> SPEED SENSORS
Vehicle: 1990 Subaru Justy GL 1.2 L3 GAS

POWER SUPPLY VOLTAGE TO ABS CONTROL UNIT

  • Turn ignition switch off.
  • Disconnect connector from ABS control unit.
  • Disassemble connector as follows:
    • Pushing tab Fig. , then disconnect connector.
    • Remove screws from connector, move boot toward harness, and slide cover in direction as shown in Fig. .
  • Turn ignition On, measure voltage between connector P12 terminal 1 and ground on except SVX models or between connector R7 terminal 1 and ground on SVX models, readings should be 10 and 12 volts.
  • Start engine, check input voltage of ABS control unit to alternator.
  • Measure voltage between ABS con...

CLICK HERE TO GET FULL ACCESS TO 1990 Subaru Justy BRAKE SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Subaru Justy vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find