Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 GMC V3500 Pickup car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 GMC V3500 Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 GMC V3500 Pickup
- 1991 GMC V3500 Pickup 6.2 V8 DIESEL, CID:379, Fuel Injection, Aspiration:379, Engine VIN:, Desg:J
- 1991 GMC V3500 Pickup 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:K
- 1991 GMC V3500 Pickup 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS, GENERAL MOTORS -> SYSTEM SERVICE -> BLEEDING BRAKES -> BLEEDING MASTER CYLINDER -> BLEEDING PARKING BRAKE -> Flushing Hydraulic System -> Manual Bleeding -> Pressure Bleeding
Vehicle: 1991 GMC V3500 Pickup 5.7 V8 GAS
BLEEDING BRAKES
Manual Bleeding
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Be sure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first, as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect and tighten forward...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
DRUM BRAKES, GENERAL MOTORS -> Drum Brake Service -> Installation -> 1990-91 C & K SERIES w/NON-SERVO BRAKES -> EXCEPT TRACKER, 1990-91 C & K SERIES w/NON-SERVO BRAKES -> TRACKER
Vehicle: 1991 GMC V3500 Pickup 6.2 V8 DIESEL
EXCEPT TRACKER, 1990-91 C & K SERIES w/NON-SERVO BRAKES
- Lubricate parking brake lever fulcrum with suitable brake lube, then attach lever to brake shoe. Ensure lever operates smoothly.
- Connect brake shoes with adjusting screw spring, then position adjusting screw. Ensure adjusting screw star wheel does not contact adjusting screw spring after installation, and also ensure RH thread adjusting screw is installed on left side of vehicle and LH thread adjusting screw is installed on right side of vehicle. When brake shoe installation is completed, ensure star wheel lines up with adjustin...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS, GENERAL MOTORS -> HEIGHT SENSING PROPORTIONING VALVE, Adjust
Vehicle: 1991 GMC V3500 Pickup 6.2 V8 DIESEL
The height sensing proportioning valve must be adjusted whenever the valve and/or linkage is disassembled or removed for service. In addition, adjustment should be checked if excessive front wheel lock-up is experienced with a lower than desired brake application rate when vehicle is at or near maximum GVWR.
- Raise and support vehicle leaving wheels on, and allow axle to hang free (no load condition).
- Remove lever retaining nut and disconnect lever from valve shaft, Fig. .
- Rotate valve shaft to permit installation of correct adjustment gauge, Fig. ,...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS, GENERAL MOTORS -> MASTER CYLINDER, Replace
Vehicle: 1991 GMC V3500 Pickup 6.2 V8 DIESEL
- On vehicles w/manual brakes, disconnect master cylinder push rod from brake pedal.
- On all models, disconnect all wire connectors from mas...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
POWER BRAKE UNITS, GENERAL MOTORS -> Bendix Brake Boosters -> HYDRO-BOOST -> ACCUMULATOR SERVICE -> ASSEMBLE -> BLEEDING BOOSTER -> CLEANING & INSPECTION -> DESCRIPTION -> DISASSEMBLE
Vehicle: 1991 GMC V3500 Pickup 5.7 V8 GAS
DESCRIPTION
The Hydro-Boost system, Fig. , provides an additional cylinder in the brake system. This cylinder contains no brake fluid. The Hydro-Boost cylinder is hydraulically operated, by pressurized fluid from the power steering pump, providing power assist to operate a dual master cylinder brake system.
The booster is composed of two sections; the linkage section and the power section.
The booster is designed so that if a total absence of power assist occurs, the brakes can be applied manually, but somewhat greater pressure on the brake pedal is required.
DISASSEMBLE
- Place accumulato...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 GMC V3500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 GMC V3500 Pickup cars and light trucks from 1990+.
DRUM BRAKES, GENERAL MOTORS -> Drum Brake Service -> Installation -> 1990-91 C & K SERIES w/NON-SERVO BRAKES -> EXCEPT TRACKER, 1990-91 C & K SERIES w/NON-SERVO BRAKES -> TRACKER
Vehicle: 1991 GMC V3500 Pickup 5.7 V8 GAS
EXCEPT TRACKER, 1990-91 C & K SERIES w/NON-SERVO BRAKES
- Lubricate parking brake lever fulcrum with suitable brake lube, then attach lever to brake shoe. Ensure lever operates smoothly.
- Connect brake shoes with adjusting screw spring, then position adjusting screw. Ensure adjusting screw star wheel does not contact adjusting screw spring after installation, and also ensure RH thread adjusting screw is installed on left side of vehicle and LH thread adjusting screw is installed on right side of vehicle. When brake shoe installation is completed, ensure star wheel lines up with adjustin...
CLICK HERE TO GET FULL ACCESS TO 1991 GMC V3500 Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 GMC V3500 Pickup vehicle.
|
| Access the Complete guide! |
