Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Hyundai Scoupe car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Hyundai Scoupe automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Hyundai Scoupe
- 1991 Hyundai Scoupe 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
- 1991 Hyundai Scoupe LS 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI -> Disc Brakes -> BRAKE PADS, Replace -> ELANTRA & SONATA -> EXCEL & SCOUPE -> Front -> Rear
Vehicle: 1991 Hyundai Scoupe LS 1.5 L4 GAS
EXCEL & SCOUPE
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
ELANTRA & SONATA
Front
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two attaching bolts from torque plate, Fig. .
- Remove brake cylinder, then position aside using suitable wire.
- Remove brake pads.
- Install pads clips, then the pads onto...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI, HYDRAULIC BRAKE SYSTEM -> MASTER CYLINDER REPLACEMENT -> EXCEPT SCOUPE & SONATA w/BENDIX SYSTEM -> SCOUPE & SONATA w/BENDIX SYSTEM
Vehicle: 1991 Hyundai Scoupe LS 1.5 L4 GAS
EXCEPT SCOUPE & SONATA w/BENDIX SYSTEM
- Disconnect electrical connector from fluid level switch, if equipped, Figs. through .
- Disconnect brake lines from master cylinder and plug open ports.
- Remove master cylinder mounting nuts, disconnect proportioning valve mounting bracket, if equipped, then remove master cylinder from vehicle.
- Reverse procedure to install, noting the following:
- Tighten master cylinder mounting nuts and brake lines to specifications.
- On 1989 Excel and Sonat...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI, DRUM BRAKES -> BRAKE SHOES REPLACEMENT -> ELANTRA & SONATA -> EXCEL & SCOUPE -> Inspection -> Installation -> Removal
Vehicle: 1991 Hyundai Scoupe LS 1.5 L4 GAS
EXCEL & SCOUPE
Removal
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove brake drum, then automatic adjuster spring and lever.
- Remove shoe-to-shoe spring and hold-down spring, Fig. .
- Remove parking brake cable from parking brake lever.
- Remove clip from parking brake cable at backing plate, then brake line from wheel cylinder.
- Remove wheel cylinder assembly with backing plate.
Inspection
- Check backing plate for wear or damage. Replace as necessary.
- Check wheel cylinder for fluid leakage. Repair or replace cylinder as necessary.
- Inspect brake lining and drum for prop...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI, HYDRAULIC BRAKE SYSTEM -> BRAKE BOOSTER PUSH ROD CLEARANCE -> SCOUPE -> SONATA LESS BENDIX SYSTEM
Vehicle: 1991 Hyundai Scoupe LS 1.5 L4 GAS
SONATA LESS BENDIX SYSTEM
- Measure dimensions A as shown in Fig. .
- Brake booster push rod clearance, dimension A, should be 1.470-1.482 inch at 191/2 inches Hg of vacuum. If not withi...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI, HYDRAULIC BRAKE SYSTEM -> MASTER CYLINDER OVERHAUL -> EXCEPT SONATA w/BENDIX SYSTEM -> SONATA w/BENDIX SYSTEM
Vehicle: 1991 Hyundai Scoupe 1.5 L4 GAS
EXCEPT SONATA w/BENDIX SYSTEM
On Scoupe models, do not remove proportioning valves from master cylinder unless master cylinder replacement is necessary.
- Remove reservoir cap, drain brake fluid into a suitable container, then remove reservoir from master cylinder, Figs. through .
- On all models, remove snap ring while depressing piston with a blunt tool. If necessary, secure master cylinder in a suitable soft jawed vise.
- On except Sonata, remove primary and secondary pistons from master cylinder body. Do not disassemble primary and secondary pistons.
- On Sonata, remove p...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Hyundai Scoupe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Hyundai Scoupe cars and light trucks from 1990+.
HYUNDAI, ANTI-LOCK BRAKES -> COMPONENT REPLACEMENT -> ELECTRONIC CONTROL UNIT (ECU) -> Front Wheel Sensors -> MODULATOR -> Rear Wheel Sensors -> SENSORS
Vehicle: 1991 Hyundai Scoupe LS 1.5 L4 GAS
ELECTRONIC CONTROL UNIT (ECU)
- Disconnect ECU electrical connector, then remove mounting bolts and washers, Fig. .
- Remove ECU from vehicle.
- Reverse procedure to install.
MODULATOR
- Drain master cylinder by opening caliper bleed screws, refer to "Bleeding System."
- Remove any remaining fluid with a syringe, then disconnect six brake lines from modulator.
- Remove mounting bolts and washers, then the modulator.
- R...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Scoupe BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Hyundai Scoupe vehicle.
|
| Access the Complete guide! |
