Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 MERCEDES-BENZ 300E car and truck
repair procedures including MERCEDES-BENZ engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 MERCEDES-BENZ 300E automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 MERCEDES-BENZ 300E
- 1991 MERCEDES-BENZ 300E 3.0 L6 GAS, CC:2962, Fuel Injection
- 1991 MERCEDES-BENZ 300E 2.6 2.6 L6 GAS, CC:2599, Fuel Injection
- 1991 MERCEDES-BENZ 300E 4matic 3.0 L6 GAS, CC:2962, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> SYSTEM COMPONENTS -> ELECTRONIC CONTROL UNIT -> LATERAL ACCELERATION SENSOR -> WHEEL SPEED SENSORS
Vehicle: 1991 MERCEDES-BENZ 300E 3.0 L6 GAS
ELECTRONIC CONTROL UNIT
There are several different control units available they are: models 124 and 201 with engine 103 and 104 less speed signal output, model 129 with engine 104 with speed signal output, model 126 with engine 116 and 117 less speed signal output, model 129 with engine 119 with speed signal output and model 140 with engines 104, 119, 120 and 603 has diagnostic capabilities. To prevent interchanging control units there are two lugs cast in the control unit connector and at the front clasp there is a notch located in different positions for different model/engi...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ -> REAR DISC BRAKE SERVICE -> 190D & E, 260E & 300CE, E & TE -> Assembly -> BRAKE CALIPER, REPLACE -> BRAKE PADS, REPLACE -> CALIPER OVERHAUL -> Disassembly -> EXCEPT 190D & E, 260E & 300CE, E & TE -> Inspection -> TEVES, BENDIX & GIRLING TYPE CALIPERS
Vehicle: 1991 MERCEDES-BENZ 300E 3.0 L6 GAS
BRAKE CALIPER, REPLACE
EXCEPT 190D & E, 260E & 300CE, E & TE
- Open caliper bleeder screw, and pump brake fluid from rear brake circuit.
- On 1st version (early production) vehicles or vehicles with starting torque compensation, disconnect and cap brake line from caliper assembly, Fig. .
- On 2nd version (later production) vehicles, loosen frame floor bracket brake hose from brake line. Disconnect brake line from caliper. Cap all open connections.
- On all models, loosen locking plate, if so equipped.
- Remove caliper attaching bolts.
- Reverse procedure to install, noting the following:
- Wh...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> DESCRIPTION
Vehicle: 1991 MERCEDES-BENZ 300E 3.0 L6 GAS
The four wheel Anti-Lock Brake system (ABS), Figs. through , uses a control unit, hydraulic actuator and wheel speed sensors to control brake fluid pressure and prevent wheel lock during severe braking conditions. With this system, directional stability is improved and steering is maintained even during braking on wet, sandy, snowy or icy road conditions.
...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ, HYDRAULIC BRAKE SYSTEMS -> HYDRAULIC BRAKE SYSTEMS -> MASTER CYLINDER SERVICE -> ASSEMBLE -> DISASSEMBLE
Vehicle: 1991 MERCEDES-BENZ 300E 4matic 3.0 L6 GAS
On Vehicles Equipped With Anti-Lock Brakes Refer To "Anti-Lock Brake Systems."
On 400SE, 400SEL and 600SEL, then tandem master cylinder with a built in switch over valve must be replace as an assembly with the brake booster.
On models except 400SE, 400SEL and 600SEL, refer to Figs. through , for master cylinder service.
DISASSEMBLE
- Position cylinder in suitable soft jawed vise.
- Remove expansion tank, then remove cap and strainer.
- Using suitable mandrel, push piston inward.
- Using suitable pliers, remove cylinder pin from housing.
- Remove piston locking ring.
- Remove piston with s...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ -> PARKING BRAKE ADJUSTMENT -> 190D & E, 260E, 300CE, D, E & TE -> 300SE & SEL, 420SEL, 560SEC, SEL & SL
Vehicle: 1991 MERCEDES-BENZ 300E 3.0 L6 GAS
300SE & SEL, 420SEL, 560SEC, SEL & SL
- Loosen each LH and RH shouldered bolt from rear axle.
- Raise and support vehicle.
- Rotate wheel until threaded hole, from which the shouldered bolt has been removed, faces forward and up at about a 45° angle on models with diagonal swing axle and exactly forward on models with diagonal swing axle and starting torque compensation.
- Insert suitable screwdriver through hole of wheel rim brake disc and rear axle shaft flange. Engage screwdriver with adjustment star and turn adjusting star until star can no longer be turned. Turn back adjusting...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 300E AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 300E cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> DESCRIPTION
Vehicle: 1991 MERCEDES-BENZ 300E 2.6 2.6 L6 GAS
The four wheel Anti-Lock Brake system (ABS), Figs. through , uses a control unit, hydraulic actuator and wheel speed sensors to control brake fluid pressure and prevent wheel lock during severe braking conditions. With this system, directional stability is improved and steering is maintained even during braking on wet, sandy, snowy or icy road conditions.
...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 300E BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 MERCEDES-BENZ 300E vehicle.
|
| Access the Complete guide! |
