Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Jeep Comanche car and truck
repair procedures including Jeep engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 Jeep Comanche automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1992 Jeep Comanche
- 1992 Jeep Comanche 2.5 L4 GAS, CID:150, Fuel Injection, Aspiration:150, Engine VIN:, Desg:P
- 1992 Jeep Comanche 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1992 Jeep Comanche Pioneer 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1992 Jeep Comanche Eliminator 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Anti-lock Brakes -> Jeep -> Troubleshooting
Vehicle: 1992 Jeep Comanche Eliminator 4.0 L6 GAS
- Check for ABS and basic brake system malfunctions, indicated by instrument cluster warning lamps.
- Visually inspect system for hydraulic leaks, damaged electrica...
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Comanche, Grand Cherokee & Wrangler -> Troubleshooting -> Brake Rattle -> Brake Roughness Or Chatter; Pedal Pumping -> Caliper Brake Fluid Leak -> Excessive Pedal Effort -> Excessive Pedal Travel -> Heavy Brake Drag -> No Braking Effect When Pedal Is Depressed -> Pull, Uneven Or Grabbing Brakes -> Rear Brakes Locking On Application
Vehicle: 1992 Jeep Comanche Eliminator 4.0 L6 GAS
Excessive Pedal Travel
- Worn brake lining.
- Pad knock back after cornering or rough road travel.
- Piston or pad assembly not properly seated or positioned.
- Air leak or insufficient fluid in system or caliper.
- Loose wheel bearing adjustment.
- Damaged or worn caliper piston seal.
- Improper booster pushrod adjustment.
- Pads out of flat more than .005 inch.
- Rear brake automatic adjusters inoperative.
- Improperly ground rear brake shoe and lining assemblies.
Brake Roughness Or Chatter; Pedal Pumping
- Excessive lateral runout of rotor.
- Rotor excessively out of parallel.
Excessive Pedal Effort
- Frozen or seiz...
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Drum Brakes -> Jeep -> Brake Service -> Brake Shoe Installation -> Brake Shoe Removal
Vehicle: 1992 Jeep Comanche 2.5 L4 GAS
Prior to removing brake shoes it is recommended that a suitable clip or restraining device be applied to the wheel cylinders to prevent the wheel cylinder pistons from being pushed out of their bores.
Brake Shoe Removal
- Raise and support vehicle.
- Remove wheel and tire assemblies, then the brake drums.
- Remove U-clip and washer from parking brake lever pivot pin, Figs. and , and discard clip.
- Using suitable tool, remove primary and secondary return springs.
- Remove spring retainers, hold-down springs, and retaining pins.
- Install suitable clamps over ends of wheel cylinders.
- Remove adjuster ...
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Comanche, Grand Cherokee & Wrangler -> Brake System Bleed
Vehicle: 1992 Jeep Comanche Eliminator 4.0 L6 GAS
Refer to "Hydraulic Brake... "
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Comanche, Grand Cherokee & Wrangler -> Parking Brake Service
Vehicle: 1992 Jeep Comanche Pioneer 4.0 L6 GAS
- Raise and support vehicle, them remove rear wheels and tires.
- Back off adjusting nut on parking brake cable equalizer Fig. , until all tension is released from rear cables.
- Remove rear rotors as outlined under "Rotor, Replace."
- Remove parking brake shoe hold down clips and pins Fig. .
- Using a needle nose pliers or suitable spring tool, remove brake return springs.
- Remove shoes and adjuster, note position of components for later assembly.
- Remove operating cam and lever if necessary as follows:
- Disconnect cable from lever.
- Pull lever forward out of boot, disengage lever from cam ...
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Jeep Comanche AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Jeep Comanche cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Caravan, Town & Country & Voyager -> Chrysler -> Dakota -> Height Sensing Proportioning Valve -> Jeep -> Proportioning Valve
Vehicle: 1992 Jeep Comanche 4.0 L6 GAS
Chrysler
Proportioning Valve
Caravan, Town & Country & Voyager
- Lift vehicle with a frame contact hoist or other means so that rear suspension is hanging free with shock absorbers disconnected. Remove tire and wheel assemblies from rear axle.
- After installing a new height sensing proportioning valve, bleed both hydraulic circuits at rear brakes.
- Reinstall rubber stone shield and ensure rear springs do not contact hoist, then loosen both front spring hanger pivot bolts.
- Loosen adjustment nut on actuator assembly, Fig. , then check actuator assembly hook. The hook should be properly seated o...
CLICK HERE TO GET FULL ACCESS TO 1992 Jeep Comanche BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
