Auto Parts Search

We have info for following modifications of 1993 Hyundai Scoupe
- 1993 Hyundai Scoupe 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:N
- 1993 Hyundai Scoupe 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:J
- 1993 Hyundai Scoupe LS 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Hyundai Scoupe AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Hyundai Scoupe cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Hyundai Scoupe 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Scoupe DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Hyundai Scoupe AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Hyundai Scoupe cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Hyundai Scoupe 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Scoupe DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Hyundai Scoupe AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Hyundai Scoupe cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Hyundai Scoupe LS 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Scoupe DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |