Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Plymouth Colt car and truck
repair procedures including Plymouth engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Plymouth Colt automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Plymouth Colt
- 1993 Plymouth Colt 1.5 L4 GAS, CC:1468, CID:90, Fuel Injection, Aspiration:90, Engine VIN:, Desg:A
- 1993 Plymouth Colt 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 1993 Plymouth Colt 1.8 L4 GAS, CC:1834, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:C
- 1993 Plymouth Colt Vista 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 1993 Plymouth Colt Vista 1.8 L4 GAS, CC:1834, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:C
- 1993 Plymouth Colt GL 1.5 L4 GAS, CC:1468, CID:90, Fuel Injection, Aspiration:90, Engine VIN:, Desg:A
- 1993 Plymouth Colt GL 1.8 L4 GAS, CC:1834, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:C
- 1993 Plymouth Colt Vista SE 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Disc Brakes -> Type 9-MR31S, MR34V, MR44V & MR46V Dual Pin Floating Caliper Disc Brake, Front -> Caliper Service -> CALIPER OVERHAUL -> CALIPER, REPLACE -> Colt -> Except Colt
Vehicle: 1993 Plymouth Colt 2.4 L4 GAS
CALIPER, REPLACE
- Raise and support vehicle, then remove wheel and tire assembly.
- Disconnect brake hose at caliper strut, then at the brake caliper. Cap vehicle brake line.
- Remove brake pads as outlined under "Brake Pad Service".
- Remove caliper support to steering knuckle attaching bolts, then caliper support.
- Reverse procedure to install, noting the following:
- Tighten bolts to specifications.
- Bleed brakes as outlined under "Brake System Bleed".
CALIPER OVERHAUL
Colt
- Remove caliper assembly as described under "Caliper, Replace."
- Remove upper slide pin, torque member, pin boot and bushing, Fig. .
- ...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> TYPE 1 MASTER CYLINDER -> TYPE 4 MASTER CYLINDER
Vehicle: 1993 Plymouth Colt GL 1.8 L4 GAS
TYPE 1 MASTER CYLINDER
Ensure the master cylinder compensates in both ports by applying the brake pedal lightly (engine running with power brakes) and observing brake fluid squirting up in the reservoir chambers. Due to a baffle incorporated in the master cylinder, only a minor fluid disturbance may be noticed...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Disc Brakes -> Type 2-MR45S, MR45V & MR58V Dual Pin Floating Caliper Disc Brake, Rear -> Troubleshooting -> LATERAL RUNOUT CHECK
Vehicle: 1993 Plymouth Colt Vista 2.4 L4 GAS
Refer to "Type 1-MR56W & MR57W Dual Piston Floating Caliper Disc Brake, Front" for system troubleshooting.
LATERAL RUNOUT CHECK
Refer to "Disc Brake Specifications" for runout specifications.
- Raise and support vehicle, then remove wheels.
- If applicable, ensure wheel bearings are properly adjusted.
- Install lug nuts to ensure rotor d...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Disc Brakes -> Type 2-MR45S, MR45V & MR58V Dual Pin Floating Caliper Disc Brake, Rear -> Brake Pad Service
Vehicle: 1993 Plymouth Colt Vista 1.8 L4 GAS
- Remove approximately 1/3 of brake fluid from master cylinder.
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove lockpin, Figs. and , then lift caliper body upward and secure with wire.
- Remove inner and outer shims, brake pad assemblies and pad clips from support mounting.
- Press caliper piston into caliper bore with ...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Anti-lock Brakes -> Type 5--Anti-Lock Braking System -> System Service -> ABS ECU -> Brake System Bleed -> Component Replacement -> HYDRAULIC UNIT (HU) -> WHEEL SPEED SENSOR
Vehicle: 1993 Plymouth Colt 1.8 L4 GAS
Brake System Bleed
- If brake fluid has been drained from master cylinder, bleed as follows:
- Fill reservoir with DOT 3 brake fluid, then depress and hold brake pedal.
- With master cylinder outlet port plugged, release brake pedal.
- Repeat 3 to 4 times, refilling reservoir as necessary.
- With engine running, bleed brake lines as follows:
- Bleed line to wheel that is diagonally opposite master cylinder.
- Bleed line to wheel that is nearest to master cylinder.
- Bleed line to remaining rear wheel, then to remaining front wheel.
- Ensure master cylinder is kept full.
- When adding brake fluid, fit filter t...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Colt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Plymouth Colt cars and light trucks from 1990+.
Drum Brakes -> Types 4 & 5--Leading Trailing Drum Brakes -> Brake Service
Vehicle: 1993 Plymouth Colt Vista 1.8 L4 GAS
For drum brake servic...
CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Colt BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Plymouth Colt vehicle.
|
| Access the Complete guide! |
