Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru SVX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru SVX cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1993 Subaru SVX LSL 3.3 H6 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hammer un...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru SVX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru SVX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru SVX cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1993 Subaru SVX LSL 3.3 H6 GAS
- Disconnect ground cable from battery.
- Move selector lever or gear shift lever to "N".
- Release parking brake.
- Jack up vehicle and support it with sturdy racks.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover.
- Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
- Remove two bolts which hold center bearing to car body.
- Place a s...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru SVX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru SVX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru SVX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1993 Subaru SVX LSL 3.3 H6 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Remove axle nut.
- Remove parking brake cable bracket from transverse link and disconnect cable from disc brake caliper.
- Using a drift and hammer, remove and discard driveshaft spring pin, Fig. .
- Remove caliper support retaining bolts and disc brake assembly. Suspend assembly from strut.
- Disconnect tie-rod end, transverse link and damper strut from axle housing.
- Remove axle shaft with housing from differential.
- Separate axle shaft from housing using a suitable puller. Check axle housing bearing for wear or damage and replace oil ...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru SVX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Subaru SVX vehicle. |
Access the Complete guide! |