Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Lexus ES300 car and truck
repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Lexus ES300 automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Disc Brakes -> Rear Disc Brakes & Parking Brakes -> Parking Brake Service -> Adjustment -> Assemble -> Disassemble
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
Disassemble
- Remove rear disc brake assembly and suspend securely. Do not let caliper hang by brake hose.
- Remove rotor disc, Fig. . If it cannot be removed easily, return shoe adjuster until wheel turns freely, then remove rotor.
- Remove shoe return springs.
- Remove front shoe as follows:
- Slide out front shoe, remove adjuster.
- Remove shoe strut with spring.
- Disconnect tension spring and remove shoe.
- Remove rear shoe as follows:
- Slide out rear shoe and remove tension spring.
- Disconnect parking brake cable from shoe lever.
- Remove shoe hold-down cups, springs and pins.
Assemble
- Apply high te...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Brake Booster, Replace -> ES300 -> GS300, SC300 & SC400 -> Installation -> LS400 -> Removal
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
Brake Booster, Replace
ES300
Refer to Camry under "Power Brake Units" in "Toyota Unit Repair" for service procedures.
GS300, SC300 & SC400
Removal
- On models with TRAC, connect a vinyl tube to bleeder plug of TRAC actuator, then loosen bleeder plug. Fluid is under high pressure and could spray out with great force so exercise caution.
- On all models, remove master cylinder as outlined under "Hydraulic Brake Systems."
- On models with TRAC, proceed as follows:
- Remove TRAC pump assembly, Fig. .
- On GS300 models, remove theft dete...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Brake Lines -> Master Cylinder -> Traction Control (TRAC) System
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
Master Cylinder
- Fill reservoir with fluid.
- Disconnect tubes from master cylinder. Then slowly depress brake pedal and hold.
- Block off outlet holes with fingers and release pedal. Repeat three or four times.
Brake Lines
Bleed wheel with longest brake line first, then work back to the master cylinder according to brake line length.
- Connect tube to brake cylinder.
- Depress pedal several times and hold, then loosen bleeder plug with pedal still held down.
- When fluid stops coming out, tighten bleeder plug and release pedal. Repeat several times.
- Repeat en...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake Pad Service -> EXCEPT GS300 -> GS300
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
EXCEPT GS300
- Remove wheel.
- Remove the bottom caliper bolt, Figs. through , and turn caliper up, Fig. .
- On models equipped with single and dual piston calipers, remove following parts:
- Two anti-squeal springs.
- Two brake pads.
- Four anti-squeal shims.
- Two pad wear indicators.
- Four pad support plates.
- On models equipped with four piston calipers, remove the following:
- Clip and two pins.
- Anti-rattle springs.
- Two pads.
- Clip and disc wear indicator from inner pad of right wheel.
- Spacer and anti-squeal shims.
- On models with dual piston calipers, install new pad support pl...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> ES300 -> GS300, LS400, SC300 & SC400 -> Installation -> LS400 -> Master Cylinder -> Proportioning & Bypass Valve -> Removal -> Traction Control (TRAC) Actuator
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
Master Cylinder
ES300
Refer to Camry in "Hydraulic Brake Systems" in "Toyota Unit Repair" for service procedure.
GS300, LS400, SC300 & SC400
Removal
- On GS300 models with TRAC, connect vinyl tube to bleeder plug of TRAC actuator, then loosen bleeder plug with ignition in OFF position. Use extreme care as fluid is under high pressure. Tighten plug when fluid stops flowing out.
- On LS400 models with TRAC, remove TRAC assembly as described under "Traction Control (TRAC) Actuator."
- On SC300 and SC400 models with TRAC, drain high-pressure fluid.
- On a...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Lexus ES300 cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Brake Pedal Freeplay -> Brake Pedal Height
Vehicle: 1994 Lexus ES300 3.0 V6 GAS
Brake Pedal Height
- Measure brake pedal height, Fig. .
- If pedal height is not 5.81-6.2 inches on ES300, 5.3-5.7 inches on 1993 GS300, 5.35-5.75 inches on 1994-96 GS300, 5.92-6.31 inches on SC300 and SC400 or 5.62-6.02 inches on 1993-94 LS400, or 5.26-5.66 inches on 1995-96 LS400 models, adjust pedal height as follows:
- Remove the undercover and lower dash finish panel as outlined under "Instrument Panel, Replace" in " Dash Panel Service" .
- Disconnect stop lamp switch.
- Loosen stop light switch locknut, then back out switch.
- Loosen pushrod locknut.
- Adjust pedal height by turning pedal pushro...
CLICK HERE TO GET FULL ACCESS TO 1994 Lexus ES300 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Lexus ES300 vehicle.
|
| Access the Complete guide! |
