Auto Parts Search
We have info for following modifications of 1994 Oldsmobile Cutlass Ciera
- 1994 Oldsmobile Cutlass Ciera S 2.2 L4 GAS, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:4
- 1994 Oldsmobile Cutlass Ciera S 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1994 Oldsmobile Cutlass Ciera SL 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1994 Oldsmobile Cutlass Ciera Cruiser S 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1994 Oldsmobile Cutlass Ciera Special Edition 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Precautions
Vehicle: 1994 Oldsmobile Cutlass Ciera Cruiser S 3.1 V6 GAS
- Grease or any other foreign material must be kept off the brake linings, caliper, surfaces of the disc and external surfaces of the hub, during service procedures. Handling the brake disc and caliper should be done in a way to avoid deformation of the disc and nicking or scratching brake linings.
- If inspection reveals rubber piston seals are worn or damaged, they should be replaced immediately.
- During removal and installation of a wheel assembly, exercise care so as not to interfere wi...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Drum Brakes -> Type 8 -> Inspection -> ADJUSTER MECHANISM -> BACKING PLATE -> BRAKE DRUMS -> BRAKE LININGS & SPRINGS -> PARKING BRAKE CABLE
Vehicle: 1994 Oldsmobile Cutlass Ciera S 3.1 V6 GAS
- If any parts are of doubtful strength or quality due to heat discoloration, or are worn, replace them.
- Inspect wheel cylinder dust boots for signs of excessive wear or damage. If any leakage is apparent replace wheel cylinder.
- Clean dirt and/or rust from brake drum, backing plate and all other components. Do not use compressed air or dry brush to clean brake parts. Many brake parts contain asbestos fibers which, if inhaled, can cause serious injury. Clean brake parts with a water soaked rag or a suitable vacuum cleaner to minimize airborne dust.
BRAKE DRUMS
Any time the brake drums are r...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> AC-DELCO TANDEM DIAPHRAGM TYPE -> BCIA SINGLE & TANDEM DIAPHRAGM TYPE -> Brakes Drag -> Brakes Grab -> Brakes Slow To Release Or Drag -> Brakes Slow To Respond -> Excessive Pedal Effort -> Hard Pedal -> Hard Pedal/Brakes Inefficient -> Low Or Spongy Brake Pedal -> Slow Or No Release -> TOYOTA/GM SINGLE DIAPHRAGM TYPE
Vehicle: 1994 Oldsmobile Cutlass Ciera Cruiser S 3.1 V6 GAS
AC-DELCO TANDEM DIAPHRAGM TYPE
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
Brakes Grab
- Faulty control valve.
Slow Or No Release
- Faulty pushrod adjustment.
- Bind in linkage.
BCIA SINGLE & TANDEM DIAPHRAGM TYPE
Brakes Grab
- Internal vacuum leak.
- Faulty control valve
Excessive Pedal Effort
- Leak in booster vacuum supply.
- Glazed linings.
- Contaminated brake fluid.
- Restricted filter or booster valve air passage.
- Leak in booster vacuum supply.
- Damaged booster or improperly assembled booster valve.
Brakes Slow To Respond
- Restricted filter or booster valve air passage.
- Contaminated brake fluid.
- Leak in...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Drum Brakes -> Type 8 -> DESCRIPTION
Vehicle: 1994 Oldsmobile Cutlass Ciera S 2.2 L4 GAS
This brake assembly is of an advanced design. It operates with fewer parts, but is equal to other drum brake systems in performance. In thi...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> BRAKE DISTRIBUTION VALVE & SWITCH -> BRAKE WARNING LAMP SWITCHES -> COMBINATION VALVE -> COMPONENT DESCRIPTION -> Diagonally Split System -> Failure Warning Switch -> Fluid Level Sensor -> Front & Rear Split System -> Metering Valve -> Proportioning Or Pressure Control Valve -> SYSTEM OPERATION -> Testing Warning Lamp Operation
Vehicle: 1994 Oldsmobile Cutlass Ciera Cruiser S 3.1 V6 GAS
SYSTEM OPERATION
Front & Rear Split System
When the brake pedal is depressed, both the primary (front brake) and the secondary (rear brake) master cylinder pistons are moved simultaneously to exert hydraulic fluid pressure on their respective systems, Fig. .
If the rear (secondary) brake system fails, initial brake pedal movement will cause the unrestricted secondary piston to bottom in the master cylinder bore. Primary piston movement will displace hydraulic fluid in the primary section of the master cylinder to actuate the front brake system.
If the front (primary) brake system fails,...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Oldsmobile Cutlass Ciera AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Oldsmobile Cutlass Ciera cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> MASTER CYLINDER
Vehicle: 1994 Oldsmobile Cutlass Ciera SL 3.1 V6 GAS
MASTER CYLINDER
- Disconnect wire connector from brake warning pressure switch.
- Disconnect brake line...
CLICK HERE TO GET FULL ACCESS TO 1994 Oldsmobile Cutlass Ciera BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Oldsmobile Cutlass Ciera vehicle. |
Access the Complete guide! |