Auto Parts Search
We have info for following modifications of 1995 Audi 90 Quattro
- 1995 Audi 90 Quattro 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:A
- 1995 Audi 90 Quattro Sport 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:A
- 1995 Audi 90 Quattro Sport 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:K
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Audi 90 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Audi 90 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Attached Wheel Bearing Housing -> Less Attached Wheel Bearing Housing
Vehicle: 1995 Audi 90 Quattro Sport 2.8 V6 GAS
Attached Wheel Bearing Housing
- Loosen wheel bolts.
- Remove wheel hub to axle shaft bolt.
- Raise and support vehicle, then remove washer and wheel.
- Remove axle shaft flange, nut from link rod, and control arm to stabilizer bar to subframe mounting bolts.
- Push control arm downward, then press axle shaft out of hub using a suitable puller.
- Reverse procedure to install, noting the following:
- Ensure splines on stub axle and wheel hub are free of oil, grease and old locking compound.
- Apply a .2 inch (5mm) band of D6 locking compound around end of outer CV joint splines, then install axle...
CLICK HERE TO GET FULL ACCESS TO 1995 Audi 90 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Audi 90 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Audi 90 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Attached Wheel Bearing Housing -> Less Attached Wheel Bearing Housing
Vehicle: 1995 Audi 90 Quattro 2.8 V6 GAS
Attached Wheel Bearing Housing
- Loosen wheel bolts.
- Remove wheel hub to axle shaft bolt.
- Raise and support vehicle, then remove washer and wheel.
- Remove axle shaft flange, nut from link rod, and control arm to stabilizer bar to subframe mounting bolts.
- Push control arm downward, then press axle shaft out of hub using a suitable puller.
- Reverse procedure to install, noting the following:
- Ensure splines on stub axle and wheel hub are free of oil, grease and old locking compound.
- Apply a .2 inch (5mm) band of D6 locking compound around end of outer CV joint splines, then install axle...
CLICK HERE TO GET FULL ACCESS TO 1995 Audi 90 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Audi 90 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Audi 90 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Attached Wheel Bearing Housing -> Less Attached Wheel Bearing Housing
Vehicle: 1995 Audi 90 Quattro Sport 2.8 V6 GAS
Attached Wheel Bearing Housing
- Loosen wheel bolts.
- Remove wheel hub to axle shaft bolt.
- Raise and support vehicle, then remove washer and wheel.
- Remove axle shaft flange, nut from link rod, and control arm to stabilizer bar to subframe mounting bolts.
- Push control arm downward, then press axle shaft out of hub using a suitable puller.
- Reverse procedure to install, noting the following:
- Ensure splines on stub axle and wheel hub are free of oil, grease and old locking compound.
- Apply a .2 inch (5mm) band of D6 locking compound around end of outer CV joint splines, then install axle...
CLICK HERE TO GET FULL ACCESS TO 1995 Audi 90 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 Audi 90 Quattro vehicle. |
Access the Complete guide! |