Auto Parts Search
We have info for following modifications of 1995 KIA Sportage
- 1995 KIA Sportage 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:1
- 1995 KIA Sportage 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 KIA Sportage cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1995 KIA Sportage 2.0 L4 GAS
- Raise and suitably support vehicle.
- Place suitable index marks (reference marks) on the drive shafts and their matching transfer case and differential input/output shafts.
- Remove four nuts holding universal...
CLICK HERE TO GET FULL ACCESS TO 1995 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 KIA Sportage cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassembly
Vehicle: 1995 KIA Sportage 2.0 L4 GAS
Disassembly
- Place drive shaft in suitable vise.
- For reassembly purposes, place index marks (reference marks) on drive shaft, spider and yoke.
- Using a suitable screwdriver, remove and discard all snap rings.
- Lightly tap with a suitable hammer to remove bearings from yoke.
- Remove yoke.
- Using a suitable drift punch and hammer, remove spider bearings.
Assembly
- Before assembly, coat inside of beari...
CLICK HERE TO GET FULL ACCESS TO 1995 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 KIA Sportage cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1995 KIA Sportage 2.0 L4 GAS
- Raise and suitably support vehicle.
- Place suitable index marks (reference marks) on the drive shafts and their matching transfer case and differential input/output shafts.
- Remove four nuts holding universal...
CLICK HERE TO GET FULL ACCESS TO 1995 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 KIA Sportage cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassembly
Vehicle: 1995 KIA Sportage 2.0 L4 GAS
Disassembly
- Place drive shaft in suitable vise.
- For reassembly purposes, place index marks (reference marks) on drive shaft, spider and yoke.
- Using a suitable screwdriver, remove and discard all snap rings.
- Lightly tap with a suitable hammer to remove bearings from yoke.
- Remove yoke.
- Using a suitable drift punch and hammer, remove spider bearings.
Assembly
- Before assembly, coat inside of beari...
CLICK HERE TO GET FULL ACCESS TO 1995 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 KIA Sportage vehicle. |
Access the Complete guide! |