1995 Lexus SC400 Brake Service (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1995 Lexus SC400 car and truck repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1995 Lexus SC400 automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Hydraulic Brake Systems -> Brake System Bleed -> Brake Lines -> Master Cylinder -> Traction Control (TRAC) System
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Master Cylinder

  • Fill reservoir with fluid.
  • Disconnect tubes from master cylinder. Then slowly depress brake pedal and hold.
  • Block off outlet holes with fingers and release pedal. Repeat three or four times.

Brake Lines

Bleed wheel with longest brake line first, then work back to the master cylinder according to brake line length.

  • Connect tube to brake cylinder.
  • Depress pedal several times and hold, then loosen bleeder plug with pedal still held down.
  • When fluid stops coming out, tighten bleeder plug and release pedal. Repeat several times.
  • Repeat en...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assembly -> Caliper Overhaul -> Caliper, Replace -> Disassembly
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Caliper, Replace

  • Remove brake hose from caliper assembly, by removing union bolt and gaskets.
  • Remove caliper bolts from torque plate, then the caliper.
  • Remove brake pads and hardware as outlined in "Brake Pad Service."
  • Reverse procedure to install, noting the following:
    • Use new gaskets on union bolt and tighten union bolt to specifications.
    • Tighten caliper bolts to specifications.
    • Fill reservoir, then bleed brakes and check for leaks.

Caliper Overhaul

Disassembly
  • Remove calipers as outlined.
  • Remove cylinder boot set rings and cylinder boots.
  • Place a piece of cloth between piston and cal...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Brake Booster, Replace -> ES300 -> GS300, SC300 & SC400 -> Installation -> LS400 -> Removal
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Brake Booster, Replace

ES300

Refer to Camry under "Power Brake Units" in "Toyota Unit Repair" for service procedures.

GS300, SC300 & SC400
Removal
  • On models with TRAC, connect a vinyl tube to bleeder plug of TRAC actuator, then loosen bleeder plug. Fluid is under high pressure and could spray out with great force so exercise caution.
  • On all models, remove master cylinder as outlined under "Hydraulic Brake Systems."
  • On models with TRAC, proceed as follows:
    • Remove TRAC pump assembly, Fig. .
    • On GS300 models, remove theft dete...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> ES300 -> Fluid Pressure Test -> GS300, LS400, SC300 & SC400 -> GS300, SC300, SC400 & LS400 -> Inspection -> Master Cylinder -> Proportioning Valve
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Master Cylinder

ES300

Refer to Camry in "Hydraulic Brake Systems" in "Toyota Unit Repair" for service procedure.

GS300, LS400, SC300 & SC400
Disassemble
  • Remove master cylinder boot, Figs. and .
  • Remove setscrew, then the reservoir tank. Remove cap and strainer from reservoir.
  • Remove two grommet, then place cylinder in suitable vise.
  • On models less TRAC, push piston in and remove stopper bolt.
  • On models with TRAC, push pistons in and remove No. 1, then No. 2 stopper bolts.
  • On all models, push pistons in and remove snap ring, then carefully remove No. 1 pist...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Disc Brakes -> Rear Disc Brakes & Parking Brakes -> Caliper Service -> Assemble -> Caliper Overhaul -> Caliper, Replace -> Disassemble -> ES300 & GS300 -> LS400, SC300 & SC400
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Caliper, Replace

ES300 & GS300
  • Remove union bolt and disconnect brake hose from caliper.
  • Remove caliper bolts and caliper from torque plate.
  • Remove brake pads as described under "Brake Pad Service."
  • Reverse procedure to install. Fill reservoir, then bleed brakes as described under "Hydraulic Brake Systems" and check for leaks.
LS400, SC300 & SC400
  • Using brake hose wrench tool No. 09751-36011, or equivalent, and suitable spanner, disconnect brake tube from hose.
  • Remove clip from flexible hose and disconnect hose from cylinder.
  • Remove caliper bolts, then the caliper.
  • Remove brake pads as...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1995 Lexus SC400 AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Lexus SC400 cars and light trucks from 1990+.

Anti-lock Brakes -> Precautions -> Coded Theft Protection Disarming
Vehicle: 1995 Lexus SC400 4.0 V8 GAS

Coded Theft Protection Disarming

  • Obtain theft protection code number from customer.
  • Enter code number prior to disconnecti...

CLICK HERE TO GET FULL ACCESS TO 1995 Lexus SC400 BRAKE SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 Lexus SC400 vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find