Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Disc Brakes -> Rotor Replacement
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
- Remove caliper as previously described. Do not disconnect brake hose.
- On front rotors, remove brake carrier from steering knuckle.
- On rear rotors, disconnect parking brake.
- On all models, remove mounting bolts and brak...
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Fixed -> Floating -> Front -> Inspection -> Rear
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
Front
Fixed
Disassemble
- Press off dust cap
- Insert 1.1025 inches thick metal segment (brake disc section) into fixed caliper and carefully force pistons out against stop with compressed air.
- Remove piston using piston-turning pliers tool No. 000 589 50 37 00, or equivalent.
- Remove piston seal from groove in cylinder bore.
Inspection
- If piston is stuck or there are scores or rusted bores, replace complete caliper.
- Remove deposits on piston with soft brass wire brush or rough cloth only. If there is noticeable damage to chrome plating, replace piston.
- Inspect pistons and bores in fixed calip...
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Brake Booster -> Non-Return Valve
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
Non-Return Valve
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Start engine and create 10.9-11.6 psi vacuum by opening and suddenly releasing throttle.
- Turn engine off.
- If vacuum drops more than 2.9 psi in 30 seconds, replace vacuum line.
- Torque vacuum line to 22 ft. lbs.
Brake Booster
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Connect suitable pressure tester at brake caliper.
- Connect Bosch ...
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 MERCEDES-BENZ S420 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 MERCEDES-BENZ S420 cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1995 C36, C220, & C280 -> ABS -> ABS Control Unit -> ASR/ETS/ESP -> Brake System Bleed -> C36, C220, C230, C280, E430, S320, S350, S420, S500, S600, SL320, SL500, SL600 & 1996-97 E300 & E320 & 1996-97 E420 -> Component Replacement -> E430, S320, S350, S420, S500, S600, SL320, SL500 & SL600 & 1996-97 E300 & E320 & 1996-97 E420 -> ESP Charging Pump -> ESP Pressurizing Piston Unit -> Front Wheel -> Hydraulic Unit -> Rear Axle -> Speed Sensor
Vehicle: 1995 MERCEDES-BENZ S420 4.2 V8 GAS
Brake System Bleed
Refer to procedure as outlined under "Hydraulic Brake Systems."
Component Replacement
Hydraulic Unit
ABS
1995 C36, C220, & C280
- Turn ignition switch to Off position.
- Disconnect hydraulic lines. Plug lines and control unit connections. Do not mix lines.
- Disconnect plastic caps.
- Remove mounting bolts and control unit.
- Reverse procedure to install. Torque mounting bolts to 11 ft. lbs.
ASR/ETS/ESP
C36, C220, C230, C280, E430, S320, S350, S420, S500, S600, SL320, SL500, SL600 & 1996-97 E300 & E320 & 1996-97 E420
- Turn ignition switch to Off position.
- Disconnect hydraulic lines. Seal...
CLICK HERE TO GET FULL ACCESS TO 1995 MERCEDES-BENZ S420 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 MERCEDES-BENZ S420 vehicle. |
Access the Complete guide! |