Auto Parts Search

A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> ADJUSTMENTS -> C & K Series -> CONTROL CABLES -> G SERIES -> Less A/C -> MODE/TEMPERATURE/RECIRCULATION ACTUATORS -> S & T Series -> With A/C
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
CONTROL CABLES
G SERIES
Less A/C
- Disconnect battery ground cable.
- Attach inner cable and sheath to instrument panel control.
- Move temperature cable to "Cold" then attach loop on inner cable to temperature door on heater case.
- Attach cable sheath to heater case, then move temperature lever to full "Heat." This will require force to slide inner cable clip to its proper position.
- Move temperature adjusting lever quickly from "Cold" to "Hot." Door should be heard seating at stops.
With A/C
The temperature door ca...
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Disarming -> 1990 -> 1990-93 -> 1990-95 -> 1990-97 -> 1991 -> 1991-93 -> 1991-94 -> 1991-95 -> 1992-93 -> 1992-99 -> 1993-2002 -> 1993-94 -> 1993-98 -> 1994 -> 1994-2002 -> 1994-95 -> 1994-96 -> 1994-98 -> 1995-2002 -> 1995-96 -> 1995-97 -> 1995-98 -> 1995-99 -> 1996 -> 1996-2001 -> 1996-97 -> 1997 -> 1997-2002 -> 1997-98 -> 1997-99 -> 1998-2000 -> 1998-2002 -> 1998-99 -> 1999 -> 1999-2000 -> 1999-2001 -> 1999-2002 -> 2000-02 -> 2001-02 -> 2002 -> 2003 -> 2003-04 -> 2003-04 Except Malibu Maxx -> Achieva & Skylark -> Alero -> Astro & Safari -> Aurora -> Avalanche -> Aveo -> Aztek & Rendezvous -> Beretta & Corsica -> Blazer, Jimmy, Sonoma & S-10 -> Bonneville, Eighty-Eight, LeSabre, LSS, Ninety-Eight & Regency -> Bravada, Envoy, Rainier, SSR & TrailBlazer -> C/K Series -> Camaro & Firebird -> Canyon & Colorado -> Caprice, Custom Cruiser & Roadmaster -> Catera -> Cavalier & Sunfire -> Century -> Corvette -> Coupe -> CTS -> Cutlass -> Cutlass Ciera & Cruiser -> Cutlass Supreme -> DeVille -> Eldorado -> Escalade -> Express, G Series & Savana -> Fleetwood -> Grand Am -> Grand Prix & Intrigue -> Impala -> ION -> L-Series -> Light Trucks & Vans -> Lumina -> Lumina APV, Montana, Silhouette, Trans Sport & Venture -> Malibu -> Malibu Maxx -> Metro -> Monte Carlo -> Park Avenue -> Passenger Cars -> Prizm -> Reatta, Toronado & Trofeo -> Regal -> Riviera -> S-Series -> Sedan -> Seville -> Sierra & Silverado -> SRX -> Storm -> Suburban, Tahoe, Yukon & Yukon XL -> Tracker -> Vibe -> VUE -> XLR -> Zone 1 -> Zone 10 -> Zone 12 -> Zone 2 -> Zone 3 -> Zone 4 -> Zone 5 -> Zone 6 -> Zone 7 -> Zone 8 -> Zone 9 -> Zones 1 & 7 -> Zones 2 & 6 -> Zones 5 & 9 -> Zones 7 & 9
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
Passenger Cars
The Sensing and Diagnostic Module (SDM) can maintain enough voltage to cause air bag deployment for up to 10 minutes after the ignition is turned Off and the battery is disconnected. Servicing the Supplemental air bag (SIR) system during this period may result in accidental deployment and personal injury.
Achieva & Skylark
1994-96
- Ensure front wheels are in straight-ahead position.
- Turn ignition switch to LOCK position.
- Remove AIR BAG fuse from fuse block.
- On 1995 models, remove lefthand sound insulator panel to ac...
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> EXPANSION VALVE, REPLACE -> G & P SERIES -> Overhead System
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
G & P SERIES
Overhead System
- Disconnect battery ground cable.
- Recover refrigerant from A/C system.
- Remove rear duct drain tube, remove duct to header bracket and roof panel screws, then remove rear duct assembly.
- Disconnect blower motor harness connector and ground wire.
- While supporting ...
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Compressor Service -> Harrison HD6/HR6-HE Compressor -> COMPRESSOR CLUTCH SERVICE -> CLUTCH COIL, REPLACE -> CLUTCH PLATE & HUB, REPLACE -> CLUTCH PULLEY & BEARING, REPLACE -> Installation -> Removal
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
CLUTCH PLATE & HUB, REPLACE
Removal
Refer to Fig. when performing compressor service.
- Support compressor in holding fixture J-33026 or equivalent.
- Using clutch hub holding tool No. J-25030-A or equivalent, prevent clutch hub and driveplate assembly from turning. Remove shaft nut using shaft nut socket tool No. J-33022 or equivalent.
- Thread clutch plate and hub assembly removing tool No. J-33013-B or equivalent onto hub with center screw forcing tip located to thrust against end of shaft. Hold body of remover with wrench and tur...
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Compressor Service -> Harrison V5 Variable Displacement Compressor -> PRECAUTIONS -> PRODUCT COMPATIBILITY
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
PRODUCT COMPATIBILITY
Before replenishing refrigerant oil, ensure ...
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1995 Oldsmobile Silhouette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1995 Oldsmobile Silhouette cars and light trucks from 1990+
Vacuum & Wiring Diagrams -> Light Duty Trucks & Vans -> Air Conditioning System Vacuum Circuits
Vehicle: 1995 Oldsmobile Silhouette 3.8 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1995 Oldsmobile Silhouette A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |