Auto Parts Search
We have info for following modifications of 1996 Buick Lesabre
- 1996 Buick Lesabre Custom 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 1996 Buick Lesabre Limited 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Drum Brakes -> Type 6 -> Brake Service -> Installation -> Removal
Vehicle: 1996 Buick Lesabre Limited 3.8 V6 GAS
Removal
- Raise and support vehicle.
- Mark relationship of wheel to axle, then remove wheel and tire assembly.
- Remove brake drum. If drum is difficult to remove, proceed as follows:
- Ensure parking brake is released.
- Back off parking brake cable adjustment.
- Remove access hole plug from backing plate, insert screwdriver through hole and push parking brake lever off its stop.
- Insert punch through hole in splash shield Fig. , tap on punch to loosen drum. Then remove drum.
- Remove actuator spring using special brake tool J 38400 or equivalent to pry loop end of spring from adjuster actuator, Fig. ...
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Brake Pad Service -> Installation -> Removal
Vehicle: 1996 Buick Lesabre Custom 3.8 V6 GAS
Removal
- Remove caliper assembly as described in "Caliper Service."
- Remove shoe and lining assemblies from caliper, Figs. through , noting the following:
- On models with tab mount outer shoe (all except series 3264), straighten bent over shoe tabs with suitable pliers.
- On models with spring mount outer shoe (series 3264), insert screwdriver between shoe and caliper and disengage buttons on shoe from holes in caliper.
- Remove sleeves and bushings from grooves in caliper mounting bolt holes, Figs. through .
Installation
- Lubricate new bushings with suitable grease, install bushings in cali...
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> 1994 -> 1995-96 -> AC-Delco Single Diaphragm Type -> AC-Delco Tandem Diaphragm Type -> Assemble -> BCIA Single Diaphragm Type -> BCIA Tandem Diaphragm Type -> Disassemble -> Overhaul -> Toyota/GM Single Diaphragm Type
Vehicle: 1996 Buick Lesabre Limited 3.8 V6 GAS
AC-Delco Tandem Diaphragm Type
1994
Disassemble
- Remove pedal pushrod boot, silencer, check valve, vacuum switch and grommets, as equipped, then the front housing seal.
- Scribe matching marks between front and rear housing sections, then mount booster assembly in suitable holding fixture with rear housing facing up.
- Apply pressure to housing with holding fixture forcing screw and rotate rear housing counterclockwise to unlock housing halves.
- Slowly release spring tension, then remove booster assembly from holding fixture. Do not allow spring tension to release suddenly, as dama...
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Drum Brakes -> Type 6 -> Tightening Specifications;
Vehicle: 1996 Buick Lesabre Custom 3.8 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Drum Brakes -> Type 6 -> Precautions
Vehicle: 1996 Buick Lesabre Custom 3.8 V6 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use, and a few precautions will minimize exposure.
- Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear a suitable respirator approved for asbestos dust use during all repair proced...
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Buick Lesabre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Buick Lesabre cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Tightening Specifications
Vehicle: 1996 Buick Lesabre Limited 3.8 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Buick Lesabre BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Buick Lesabre vehicle. |
Access the Complete guide! |