Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Brake Booster -> Non-Return Valve
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
Non-Return Valve
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Start engine and create 10.9-11.6 psi vacuum by opening and suddenly releasing throttle.
- Turn engine off.
- If vacuum drops more than 2.9 psi in 30 seconds, replace vacuum line.
- Torque vacuum line to 22 ft. lbs.
Brake Booster
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Connect suitable pressure tester at brake caliper.
- Connect Bosch ...
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> C220 & C230 & 1995 C280 -> E430 & 1996-99 C280, E300 & E320 & 1996-97 E420 -> Fixed Caliper Brake Pad, Replace -> Floating Caliper Brake Pad, Replace
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
Floating Caliper Brake Pad, Replace
C220 & C230 & 1995 C280
- Disconnect wear sensor connector.
- On 1995 models without cam on housing, remove lower mounting bolt, steady sliding pin and fold sliding caliper up. Do not move steering wheel while housing if folded out.
- On 1996-99 models with cam on housing, remove lower mounting bolt, steady sliding pin and remove floating caliper, securing with suitable hook.
- On all models, inspect boots for damage and replace as required.
- Remove brake pads.
- Remove some brake fluid from reservoir.
- Pull wear sensor out of lining back plate.
- Push piston back...
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Less ESP -> With ESP
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
Less ESP
- Connect suitable brake fluid changing tool following tool manufacturer's instructions. Bleed pressure is 29 psi.
- Open righthand rear brake caliper bleed screw and allow approximately 2.7 ounces of brake fluid to flow out without any bubbles.
- Tighten bleed screw to specifications.
- Repeat bleeding procedure at lefthand rear, righthand front and lefthand front calipers.
- On S320, S350, S420, S500 and S600 models, open master cylinder bleed screw and allow brake fluid to flow without any bubbles. Tighten bleed screw to specifications.
- On all models, operate brake pedal firmly s...
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Inspection -> Master Cylinder
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
Master Cylinder
Brake master cylinder must not be repair on C36, C220, C230, C280, E300, E320, E420, E430, S420, S500, S600 & SL600. Replace only.
Disassemble
- Position cylinder in suitable soft jawed vise, Fig. .
- Slightly press piston using suitable alignment tool and remove cylindrical pin using suitable pliers.
- Remove locking ring and piston with secondary seal package from housing using suitable pliers.
- Remove complete piston for floating circuit using light blows to housing on suitable wood support.
Inspection
- Clean housing and inspect bore. If bore surface is scored or damaged, r...
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 MERCEDES-BENZ S320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 MERCEDES-BENZ S320 cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 1996 MERCEDES-BENZ S320 3.2 L6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 MERCEDES-BENZ S320 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |