Auto Parts Search

We have info for following modifications of 1996 Nissan Sentra
- 1996 Nissan Sentra E 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1996 Nissan Sentra GXE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1996 Nissan Sentra XE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1996 Nissan Sentra GLE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Malfunction Indicator Lamp (MIL) -> 1993-2000
Vehicle: 1996 Nissan Sentra E 1.6 L4 GAS
The MIL will illuminate to indicate that a system fault has been detected. The MIL will blink simultaneously with the red Light Emitting Diode (LED) on the Electronic Control Module (ECM). Following diagnosis and repair of all system faults, reset the MIL lamp. If using a scan tool, follow tool manufacturer's instructions to clear DTCs. A second, though more time consuming method of clearing DTCs involves using a small screwdriver to turn the diagnostic mode selector switch, located on the side of the ECM/ECU, fully clockwise. After waiting 2 seconds, rota...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Anti-Lock Warning Lamp -> 1995-2006 Sentra
Vehicle: 1996 Nissan Sentra GLE 1.6 L4 GAS
This lamp will be illuminated when the ignition switch is placed in the on position as a bulb check. If the lamp remains lit or lights during vehicle operation, a problem in the anti-lock brake/traction control system is indicated. When the lamp is lit, place the ignition switch in the off position, then restart the engine. If the lamp remains lit, the system must be serviced. The basic brake system will remain functional. After servicing the system, proceed as follows:
- On 1995-99 models, locate the DLC located behind instrument panel fuse panel cover.
- On 2000-06 models, locate t...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 1996 Nissan Sentra XE 1.6 L4 GAS
This lamp will be illuminated when the automatic transmission fluid temperature is excessive. When...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> All Wheel Drive (AWD) Warning Lamp ->
Vehicle: 1996 Nissan Sentra E 1.6 L4 GAS
When the ignition switch is placed in the on position, the AWD warning lamp will light as a bulb check but should go off soon after the engine is started. If a malfunction in the AWD system exist or if fr...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Vehicle Dynamic Control (VDC) Warning Lamp ->
Vehicle: 1996 Nissan Sentra GXE 1.6 L4 GAS
The VDC lamp should illuminate when the ignition switch is placed in the on position for a few seconds or when the VDC control switch is in the off position. If the VDC lamps illuminates while ope...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Nissan Sentra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Nissan Sentra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Malfunction Indicator Lamp (MIL) -> 1993-2000
Vehicle: 1996 Nissan Sentra XE 1.6 L4 GAS
The MIL will illuminate to indicate that a system fault has been detected. The MIL will blink simultaneously with the red Light Emitting Diode (LED) on the Electronic Control Module (ECM). Following diagnosis and repair of all system faults, reset the MIL lamp. If using a scan tool, follow tool manufacturer's instructions to clear DTCs. A second, though more time consuming method of clearing DTCs involves using a small screwdriver to turn the diagnostic mode selector switch, located on the side of the ECM/ECU, fully clockwise. After waiting 2 seconds, rota...
CLICK HERE TO GET FULL ACCESS TO 1996 Nissan Sentra MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |