Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Oldsmobile Aurora car and truck
repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Oldsmobile Aurora automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Adjustments -> Parking Brake
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
Parking Brake
- Cycle brake system as follows:
- Apply service brake with a pedal force of 150 lbs. and release.
- Fully apply parking brake using approximately 125 lbs. of force on final stroke, and release.
- Apply and release parking brake two additional times as described above.
- Check parking brake pedal assembly for full release by turning ignition on and inspecting brake warning light. Light should be off. If brake warning light is on and parking brake appears to be fully released, operate manual pedal release lever and pull downward on front park brake cable to remove slack from pedal ass...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Tightening Specifications
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Troubleshooting -> Brake Roughness
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the disc. If roughness or vibration is encountered during highway operation or if pedal pulsation is experienced at low speeds, the disc may have excessive thickness variation. To check for this condition, measure the disc at 12 points with a micrometer at a radius approximately one inch from edge of disc. If thic...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Brake Distribution Valve & Switch -> Brake Warning Lamp Switches -> Combination Valve -> Components -> Diagonally Split System -> Failure Warning Switch -> Fluid Level Sensor -> Front & Rear Split System -> Metering Valve -> Proportioning Or Pressure Control Valve -> System Operation -> Warning Lamp
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
System Operation
Front & Rear Split System
When the brake pedal is depressed, both the primary (front brake) and the secondary (rear brake) master cylinder pistons are moved simultaneously to exert hydraulic fluid pressure on their respective systems, .
If the rear (secondary) brake system fails, initial brake pedal movement will cause the unrestricted secondary piston to bottom in the master cylinder bore. Primary piston movement will displace hydraulic fluid in the primary section of the master cylinder to actuate the front brake system.
If the front (primary) brake system fails, init...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Anti-lock Brakes -> Aurora, Caprice, DeVille, Eldorado, Fleetwood, Impala SS, Riviera, Roadmaster & Seville -> Precautions -> ABS Service
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
ABS Service
Before performing any repairs on the ABS system, note the following precautions:
- If any welding work is to be done on the vehicle using and arc welder, the EBCM and hydraulic modulator connectors should be disconnected.
- Hydraulic modulator and EBCM connectors should never be disconnected when the ignition switch is on.
- Do not use a fast charger to charge battery when battery is connected. Always disconnect battery from system before using a f...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Oldsmobile Aurora AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Oldsmobile Aurora cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> AC-Delco Single Diaphragm Type -> AC-Delco Tandem Diaphragm Type -> Air Method -> Brake Pedal -> Gauge Method -> Pushrod -> Toyota/GM Single Diaphragm Type
Vehicle: 1996 Oldsmobile Aurora 4.0 V8 GAS
Brake Pedal
Toyota/GM Single Diaphragm Type
- With engine running and brake pedal in rest position, measure distance between face of pedal and floor mat.
- If distance is not 5.79-6.18 inches, adjust pedal height as follows:
- Remove left lower instrument panel trim section and air duct.
- Loosen stop lamp switch sufficiently to gain clearance for pedal adjustment.
- Loosen locknut and rotate pedal pushrod as needed to obtain specified pedal height, then tighten locknut.
- Adjust position of brake light switch so that plunger lightly contacts pedal stopper and brake lamps are off when pedal is release...
CLICK HERE TO GET FULL ACCESS TO 1996 Oldsmobile Aurora BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
