Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Subaru SVX car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Subaru SVX automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Subaru SVX
- 1996 Subaru SVX L 3.3 H6 GAS, CC:3318, Fuel Injection, Engine VIN:, Desg:8
- 1996 Subaru SVX LSI 3.3 H6 GAS, CC:3318, Fuel Injection, Engine VIN:, Desg:8
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> Except SVX -> Overhaul -> SVX
Vehicle: 1996 Subaru SVX L 3.3 H6 GAS
Brake Booster, Replace
Except SVX
- Disconnect brake fluid level indicator connector, if equipped.
- Remove master cylinder assembly.
- Disconnect vacuum hose from brake booster.
- Working from inside the passenger compartment, remove snap pin and operating rod clevis pin from brake pedal assembly.
- Remove brake booster retaining nuts, then brake booster from vehicle.
- Reverse procedure to install. Torque brake booster retaining nuts to 9-17 ft. lbs.
SVX
- Disconnect battery ground cable.
- Raise and support vehicle and remov...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Front -> Impreza -> Justy -> Legacy Except Turbo -> Legacy Turbo & SVX -> Loyale -> Overhaul -> Rear -> Replacement
Vehicle: 1996 Subaru SVX L 3.3 H6 GAS
Replacement
Front
Refer to Figs. through , when performing the following procedure.
- Raise and support vehicle.
- Remove front wheels.
- Disconnect brake hose from caliper. Plug hose to prevent fluid leakage.
- On Loyale models, remove outer parking brake cable clip and disconnect cable.
- On all except Justy with 12 inch wheels, remove caliper lockpin, rotate caliper on guide pin, then remove caliper.
- On Justy with 12 inch wheels, remove caliper to support retaining bolts, then the boot protector and caliper.
- On all models, reverse procedure to install noting...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Anti-lock Brakes -> SVX & 1993-94 Legacy -> System Service -> ABS Hydraulic Unit -> Brake System Bleed -> Component Replacement -> Electronic Control Unit -> Front Sensors -> Inspection -> Legacy -> Rear Sensors -> Replacement -> SVX
Vehicle: 1996 Subaru SVX LSI 3.3 H6 GAS
Brake System Bleed
Legacy
- Bleed air from primary circuit between unit and master cylinder using secondary air bleeder on top of hydraulic unit, Fig. . Torque bleeder screws to 5-6.5 ft. lbs.
- Bleed air from primary line between unit and wheel cylinder using bleeder on front RH wheel cylinder.
- Bleed air from air bleeder on rear LH wheel cylinder.
- Bleed air from secondary circuit between unit and master cylinder using primary air bleeder on top of hydraulic unit.
- Bleed air from secondary line between hydraulic unit and wheel cylinder using air bleeder on front LH wheel cylinder.
- Ble...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing
Vehicle: 1996 Subaru SVX L 3.3 H6 GAS
Perform this procedure with the parking brakes applied.
- Start engine, then stop after one or two minutes of running time.
- Depress brake pedal several times with normal force.
- If pedal travel decreases the more times the brake pedal is depressed, the ...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Anti-lock Brakes -> SVX & 1993-94 Legacy -> Description
Vehicle: 1996 Subaru SVX LSI 3.3 H6 GAS
The Anti-lock brake system (ABS) electrically controls brake fluid pressure to prevent wheel lock during braking on slippery road surfaces, improving steering stability and shortening the braking distance. If the ABS becomes inoperative, a fail-safe system activates to ensure conventional brake system operation.
The front and rear wheels utilize a four sensor, four channel control design. The...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru SVX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru SVX cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 1996 Subaru SVX LSI 3.3 H6 GAS
Front
Refer to Figs. through , when performing the following procedure.
- Raise and support vehicle.
- Remove front wheels.
- On Loyale models, remove outer parking brake cable clip and disconnect cable.
- On Legacy Turbo and SVX models, disconnect brake hose from strut.
- On all except Justy with 12 inch wheels, remove caliper lockpin, then rotate caliper on guide pin.
- On Justy with 12 inch wheels, remove caliper-to-support retaining bolts, then the boot protector and caliper.
- On all models, remove brake pads from support.
- Reverse procedure to install no...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru SVX BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Subaru SVX vehicle.
|
| Access the Complete guide! |
