Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Disc Brakes -> Caliper Replacement -> C220, C230, C280, E300, E320, and E430 -> C36, E420, S320, S350, S420, S500, S600, SL320, SL500 & SL600 -> Front -> Rear
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
C36, E420, S320, S350, S420, S500, S600, SL320, SL500 & SL600
- Disconnect and plug brake hoses, Fig. .
- Disconnect wear sensor connector.
- Remove connector, and if required, speed sensor.
- Remove mounting bolts and caliper from steering knuckle or wheel carrier.
- Reverse procedure to install, noting the following:
- Install new self-locking bolts and tighten to specifications.
- Only transparent (temperature resistance) wear sensors may be installed on rear axle.
- Front wear sensors' contacts must correspond to plug connectors.
- On E420, E430, S320, S350, S420, S500 and S600 models equipped wit...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> C220 & C230 & 1995 C280 -> E430 & 1996-99 C280, E300 & E320 & 1996-97 E420 -> Fixed Caliper Brake Pad, Replace -> Floating Caliper Brake Pad, Replace
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
Floating Caliper Brake Pad, Replace
C220 & C230 & 1995 C280
- Disconnect wear sensor connector.
- On 1995 models without cam on housing, remove lower mounting bolt, steady sliding pin and fold sliding caliper up. Do not move steering wheel while housing if folded out.
- On 1996-99 models with cam on housing, remove lower mounting bolt, steady sliding pin and remove floating caliper, securing with suitable hook.
- On all models, inspect boots for damage and replace as required.
- Remove brake pads.
- Remove some brake fluid from reservoir.
- Pull wear sensor out of lining back plate.
- Push piston back...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Anti-lock Brakes -> Precautions -> Battery Ground Cable
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Components -> Electronic Control Unit -> System -> Wheel Speed Sensors
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
System
Four-wheel ABS uses a control unit, hydraulic actuator and wheel speed sensors to control brake fluid pressure and prevent wheel lock during severe braking conditions,
Basic ABS components are supplemented by an expanded hydraulic unit, a charging pump, a fourth wheel speed sensor and a more comprehensive electronic system for Acceleration Slip Regulation (ASR) and Electronic Traction System (ETS).
Integrated with ABS and traction control systems, Electronic Stability Program (ESP) detects slides and applies brake pressure to individual wheels to help maintain control.
Components
...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> Foot Control Cable, Replace -> Foot Control, Replace -> Hand Lever, Replace -> Parking Brake Rear Control Cable, Replace -> Parking Brake Shoes, Replace
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
Foot Control, Replace
- On S320, S350, S420, S500, S600, SL320, SL500 and SL600 models, remove exhaust system heat shield.
- On C36, C220, C230, C280, E300, E320, E420 and E430 models, remove cover panel under rear squab.
- On S320, S350, S420, S500 and S600 models, proceed as follows:
- Disconnect exhaust system as required.
- Turn preloading automatic slack adjuster eccentric pin counterclockwise approximately 1/2 turn using suitable Allen wrench.
- At same time, push pin back longitudinal slot until spring-loaded locking eccentric locks into spring clip position with elevation.
- On C36, C2...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 MERCEDES-BENZ SL320 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 MERCEDES-BENZ SL320 cars and light trucks from 1990+.
Disc Brakes -> Rotor Replacement
Vehicle: 1997 MERCEDES-BENZ SL320 3.2 L6 GAS
- Remove caliper as previously described. Do not disconnect brake hose.
- On front rotors, remove brake carrier from steering knuckle.
- On rear rotors, disconnect parking brake.
- On all models, remove mounting bolts and brak...
CLICK HERE TO GET FULL ACCESS TO 1997 MERCEDES-BENZ SL320 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |