Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Chevrolet Lumina car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Chevrolet Lumina automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Chevrolet Lumina
- 1998 Chevrolet Lumina LTZ 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1998 Chevrolet Lumina LTZ 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 1998 Chevrolet Lumina 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Drum Brakes -> Type 5 -> Adjustments -> Parking Brake Adjustment -> Service Brake Adjustment
Vehicle: 1998 Chevrolet Lumina LTZ 3.1 V6 GAS
Service Brake Adjustment
- Raise and support vehicle.
- Mark relationship of wheel to axle, then remove wheel and tire assembly.
- Remove brake drum. If drum is difficult to remove, proceed as follows:
- Ensure parking brake is released.
- Back off parking brake cable adjustment.
- Remove access hole plug from backing plate, insert screwdriver through hole and push parking brake lever off its stop.
- Insert punch through hole in splash shield Fig. , tap on punch to loosen drum. Then remove drum.
- Measure inside diameter of drum using tool J 21177-A or J22364-01, or equivalent.
- Adjust by turning star wheel ...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi (Delco-Moraine) Type VI -> DESCRIPTION -> ABS Warning Lamp -> Brake Warning Lamp -> Electronic Brake Control Module/Electronic Brake & Traction Control Module -> Expansion Spring Brake -> Hydraulic Modulator/Motor Pack Assembly -> System Components -> System Operation -> Wheel Speed Sensors
Vehicle: 1998 Chevrolet Lumina LTZ 3.1 V6 GAS
System Operation
The function of the Anti-Lock Brake System (ABS) is to minimize wheel lock-up during heavy braking on most road surfaces. The system performs this function by monitoring wheel speed and controlling the brake fluid pressure to each front wheel and both rear wheels during braking. This allows the driver to retain directional stability and better steering capability.
System Components
Refer to Fig. for system component locations.
Electronic Brake Control Module/Electronic Brake & Traction Control Module
The ABS system is controlled by a microprocessor based Electronic Brak...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Drum Brakes -> Type 5 -> Precautions
Vehicle: 1998 Chevrolet Lumina 3.1 V6 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use, and a few precautions will minimize exposure.
- Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear a suitable respirator approved for asbestos dust use during all repair proced...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Adjustments -> Parking Brake
Vehicle: 1998 Chevrolet Lumina LTZ 3.8 V6 GAS
Parking Brake
- Cycle brake system as follows:
- Apply service brake with a pedal force of 150 lbs. and release.
- Fully apply parking brake using approximately 125 lbs. of force on final stroke, and release.
- Apply and release parking brake two additional times as described above.
- Check parking brake pedal assembly for full release by turning ignition on and inspecting brake warning light. Light should be off.
- If brake warning light is on and parking brake appears to be fully released, operate manual pedal release lever and pull downward on front park brake cable to remove slack from pedal ass...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera -> Corvette -> Disassemble -> Except Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera -> Master Cylinder Overhaul -> Wheel Cylinder Overhaul
Vehicle: 1998 Chevrolet Lumina 3.1 V6 GAS
Master Cylinder Overhaul
Except Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera
Disassemble
Refer to Figs. and when performing the following procedures.
- Remove master cylinder from vehicle as follows:
- Disconnect and plug hydraulic lines.
- Remove two master cylinder attaching nuts, then the master cylinder.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm.
- Remove fluid level switch, if equipped.
- On models with compact master cylinder, remove proportioner valve assembly, Fig. .
- On all models, depress pri...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Lumina AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Lumina cars and light trucks from 1990+.
Drum Brakes -> Type 5 -> Description
Vehicle: 1998 Chevrolet Lumina LTZ 3.8 V6 GAS
This brake assembly operates with fewer parts, but is equal to other drum brake systems in performance. In this assembly, a ...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Lumina BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 Chevrolet Lumina vehicle.
|
| Access the Complete guide! |
