Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder -> Traction Control (TRAC) Actuator
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
Master Cylinder
- On 2001-02 ES300 models, remove air cleaner cover with air cleaner hose.
- On all models, disconnect level warning switch connector.
- Remove brake fluid with suitable syringe.
- Remove brake lines with brake line wrench No. 09023-00100 and 09751-36011, or equivalents.
- Remove master cylinder mounting nuts, then the master cylinder and gasket.
- Reverse procedure to install, noting the following:
- Adjust length of booster pushrod before installation of master cylinder.
- After installation, fill brake fluid and bleed b...
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
The Anti-lock Brake System (ABS), Figs. through , is a brake system which controls the wheel cylinder hydraulic pressure of all four wheels during sudden braking and braking on slippery road surfaces, preventing the wheels from locking. The ABS enables steering round an obstacle with greater degree of certainty even when panic braking. Also, the ABS enables stopping in a panic brake while keeping the...
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Disc Brakes -> Rear Disc Brakes & Parking Brakes
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Overhaul -> Replacement
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
Replacement
- Remove brake hose from caliper assembly, by removing union bolt and gaskets.
- Remove caliper bolts from torque plate, then the caliper.
- Remove brake pads and hardware as outlined in "Brake Pad Service."
- Reverse procedure to install, noting the following:
- Use new gaskets on union bolt and tighten union bolt to specifications.
- Tighten caliper bolts to specifications.
- Fill reservoir, then bleed brakes and check for leaks.
Overhaul
Disassemble
- Remove calipers as outlined.
- Remove cylinder boot set rings and cylinder boots.
- Place a piece of cloth between piston and caliper, then, using c...
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake Pad Service -> ES300 -> GS300, GS400, GS430 & SC430 -> IS300 -> LS400 & LS430 -> RX300 -> SC300 & SC400
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
ES300
- Remove front wheels and temporarily secure discs with lug nuts.
- Inspect brake pad thickness through caliper inspection hole.
- Replace brake pads if thickness is less than .039 inch.
- Remove bolt securing caliper flexible hose to front shock absorber.
- Remove bottom side installation bolt, then lift up caliper and suspend securely.
- Do not disconnect flexible hose from caliper.
- Remove two brake pads with four anti-squeal shims, Fig. .
- Remove pad wear indicator plate.
- Remove two pad support plates.
- Support plates can be used again provided they have sufficient rebound, no deformation, ...
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Lexus ES300 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> ES300 -> Inspection -> Master Cylinder -> Proportioning Valve
Vehicle: 1998 Lexus ES300 3.0 V6 GAS
Master Cylinder
Disassemble
- On IS300, ES300 & RX300 remove brake fluid reservoir.
- On all models, remove master cylinder boot, Figs. through .
- Remove set screw, then the reservoir tank. Remove cap and strainer from reservoir.
- Remove two grommets, then place cylinder in suitable vise.
- On models less TRAC and VSC, push piston in and remove stopper bolt.
- On models with TRAC, push pistons in and remove No. 1, then No. 2 stopper bolts.
- On models with VSC, push in piston with a screwdriver, then remove straight pin by turning over cylinder body. Tape screwdriver tip before using it.
- On all m...
CLICK HERE TO GET FULL ACCESS TO 1998 Lexus ES300 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Lexus ES300 vehicle. |
Access the Complete guide! |