Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Oldsmobile Intrigue car and truck
repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Oldsmobile Intrigue automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Oldsmobile Intrigue
- 1999 Oldsmobile Intrigue 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 1999 Oldsmobile Intrigue 3.5 V6 GAS, CID:214, Fuel Injection, Aspiration:214, Engine VIN:, Desg:H
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 1) -> Precautions
Vehicle: 1999 Oldsmobile Intrigue 3.8 V6 GAS
- Grease or any other foreign material must be kept off brake linings, caliper, surfaces of disc and external surfaces of hub during service procedures.
- Handling brake disc and caliper should be done in a way to avoid deformation of disc and nicking or scratching brake linings.
- If inspection reveals worn or damaged rubber piston seals, they should be replaced.
- During removal and installation of a wheel assembly, ensure not to interfere with or damage ca...
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Power Brake Units -> Precautions
Vehicle: 1999 Oldsmobile Intrigue 3.5 V6 GAS
- After disassembling power brake unit, soak metal components in solvent.
- Use only alcohol on components containing rubber. After components have been thoroughly cleaned and rinsed in solvent, they should be washed again in clean alcohol before assembly.
- Use compressed air to blow dirt and cleaning fluid from ...
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Anti-lock Brakes -> Bosch Type 5.3 -> Precautions -> ABS Service
Vehicle: 1999 Oldsmobile Intrigue 3.5 V6 GAS
ABS Service
Before performing any repairs on the ABS system, note the following precautions:
- Before using electric welding equipment, disconnect EBTCM.
- Carefully note routing, position and mounting ABS and TCS wiring, connectors, clips and brackets. ABS and TCS are extremely sensitive to electromagnetic interference.
- Do not use a fast charger when battery is connected. Never disconnect battery from system with engine running.
- Ignition switch must be in Off position when disconnecting EBTCM.
- Do not hang other components on wheel speed sensor cables.
- Do not force wheel speed sensors into pl...
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Hydraulic Brake Systems -> General Motors -> Hydraulic Brake System Specifications
Vehicle: 1999 Oldsmobile Intrigue 3.5 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Hydraulic Brake Systems -> General Motors -> Troubleshooting -> Master Cylinder Internal Fluid Leakage Check -> Road Test
Vehicle: 1999 Oldsmobile Intrigue 3.5 V6 GAS
When troubleshooting the hydraulic brake system, perform the following inspections.
Master Cylinder Internal Fluid Leakage Check
Start engine and depress the brake pedal. If the pedal gradually falls under constant pressure, the hydraulic system may be leaking. Raise the vehicle on a lift and inspect all tubing lines and backing plates for signs of leakage. It may be required to lift or remove the carpeting or floor mats to inspect for boost...
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Oldsmobile Intrigue AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Oldsmobile Intrigue cars and light trucks from 1990+.
Anti-lock Brakes -> Delphi (Delco-Moraine) Type VI -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Alero, Cutlass, Grand Am & Malibu -> Cavalier & Sunfire -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> EBCM Connector Views -> Electromagnetic Interference Test -> Ignition Cycle Default -> Intermittents & Poor Connections -> Intrigue, Lumina, & Monte Carlo -> Metro -> Scan Tool -> Wiring Diagrams
Vehicle: 1999 Oldsmobile Intrigue 3.8 V6 GAS
Accessing Diagnostic Trouble Codes
Diagnostic Trouble Codes (DTCs) may be read using a suitably programed scan tool. There are no provisions for flash code diagnostics.
- Before beginning service, perform the following preliminary inspection:
- Check master cylinder for proper brake fluid level.
- Inspect hydraulic modulator for any leaks or wiring damage.
- Inspect brakes at all four wheels to ensure no drag exists and that brakes are operating normally.
- Check wheel bearings for any excessive wear or damage.
- Inspect wheel speed sensors for correct air gap, solid sensor attachment, damaged...
CLICK HERE TO GET FULL ACCESS TO 1999 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Oldsmobile Intrigue vehicle.
|
| Access the Complete guide! |
