Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Lexus SC400 car and truck
repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Lexus SC400 automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Lexus SC400 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Lexus SC400 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front
Vehicle: 2000 Lexus SC400 4.0 V8 GAS
Front
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove bolts securing exhaust front pipe, center pipe, heat insulator, and center floor crossmember brace.
- Make a reference mark across driveline and differential companion flange.
- Remove bolts, washer, and nuts from companion flange.
- Separate flexible couplings from differential side. If flexible coupling cannot be easily separated by hand, insert suitable tool into ...
CLICK HERE TO GET FULL ACCESS TO 2000 Lexus SC400 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Lexus SC400 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Lexus SC400 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Rear
Vehicle: 2000 Lexus SC400 4.0 V8 GAS
Rear
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Remove center exhaust pipe.
- Remove cotter pin and lock cap.
- Remove bolts securing rear suspension member brace.
- Place reference mark on driveshaft and side gear. Do not punch mark reference mark, use paint.
- Remove six driveshaft side gear bolts and washers while depressing brake pedal. Coat bolt threads with engine oil.
- Hold inboard joint side of driveshaft so that outboa...
CLICK HERE TO GET FULL ACCESS TO 2000 Lexus SC400 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



