Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Disc Brakes -> Precautions -> Battery Ground Cable
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> Foot Control Cable, Replace -> Foot Control, Replace -> Hand Lever, Replace -> Parking Brake Rear Control Cable, Replace -> Parking Brake Shoes, Replace -> SLK230
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Foot Control, Replace
- On S320, S420, SL500 and SL600 and 1998-99 CL500, CL600, S500, and S600 models, remove exhaust system heat shield.
- On C43, C230, C280, E300, E320 and E430 models,remove cover panel under rear squab.
- On S320 and S420 and 1998-99 CL500, CL600, S500 and S600 models, proceed as follows:
- Disconnect exhaust system as required.
- Turn preloading automatic slack adjuster eccentric pin counterclockwise approximately 1/2 turn using suitable Allen wrench.
- At same time, push pin back longitudinal slot until spring-loaded locking eccentric locks into spring clip position ...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Less ESP -> With ESP
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Less ESP
- Connect suitable brake fluid changing tool following tool manufacturer's instructions. Bleed pressure is 29 psi.
- Open righthand rear brake caliper bleed screw and allow approximately 2.7 ounces of brake fluid to flow out without any bubbles.
- Tighten bleed screw to specifications.
- Repeat bleeding procedure at lefthand rear, righthand front and lefthand front calipers.
- On CL500, CL600, S320, S420, S430, S500 and S600 models, open master cylinder bleed screw and allow brake fluid to flow without any bubbles. Tighten bleed screw to specifications.
- On all models, operate brake ...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> C43, C230, C280, E300, E320, E430, S320, S420, SL500, SL600 & SLK230 & 1998-99 CL500, CL600, S500 & S600 -> CLK320 & CLK430 -> S430 & 2000 CL500, CL600, S500 & S600
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Brake Booster, Replace
C43, C230, C280, E300, E320, E430, S320, S420, SL500, SL600 & SLK230 & 1998-99 CL500, CL600, S500 & S600
- Remove master cylinder as outlined in "Hydraulic Brake Systems" section.
- Inspect master cylinder rear piston for leaks. If no leaks are visible, proceed as follows:
- Remove and measure brake fluid in booster.
- If there is more than 3.38 ounces of brake fluid, booster must be replaced.
- Disconnect vacuum line at booster.
- Remove cover below instrument panel.
- Disconnect brake pedal return spring.
- Disconnect pedal locking device and remove pin.
- Remove carrier mou...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Fixed -> Floating -> Front -> Inspection -> Rear
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Front
Fixed
Disassemble
- Press off dust cap
- Insert 1.1025 inches thick metal segment (brake disc section) into fixed caliper and carefully force pistons out against stop with compressed air.
- Remove piston using piston-turning pliers tool No. 000 589 50 37 00, or equivalent.
- Remove piston seal from groove in cylinder bore.
Inspection
- If piston is stuck or there are scores or rusted bores, replace complete caliper.
- Remove deposits on piston with soft brass wire brush or rough cloth only. If there is noticeable damage to chrome plating, replace piston.
- Inspect pistons and bores in fixed calip...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ S430 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ S430 cars and light trucks from 1990+.
Power Brake Units -> Precautions -> Battery Ground Cable
Vehicle: 2000 MERCEDES-BENZ S430 4.3 V8 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ S430 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |