Auto Parts Search
We have info for following modifications of 2001 Audi A4 Quattro
- 2001 Audi A4 Quattro 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:H
- 2001 Audi A4 Quattro 1.8 L4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:C
- 2001 Audi A4 Quattro Avant 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:H
- 2001 Audi A4 Quattro Avant 1.8 L4 GAS, CC:1781, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 Audi A4 Quattro 2.8 V6 GAS
FRONT
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing arm.
- Remove swing arm to track control arms mounting bolt and push both track control arms up and out, then tilt swing arm away.
- Remove drive axle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 89 ft. lbs.
- Torque wheel hub nut to 280 ft. lbs.
- Torque drive axle flange bolts to 59 ft. lbs.
REAR
- Pull...
CLICK HERE TO GET FULL ACCESS TO 2001 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 Audi A4 Quattro Avant 1.8 L4 GAS
FRONT
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing arm.
- Remove swing arm to track control arms mounting bolt and push both track control arms up and out, then tilt swing arm away.
- Remove drive axle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 89 ft. lbs.
- Torque wheel hub nut to 280 ft. lbs.
- Torque drive axle flange bolts to 59 ft. lbs.
REAR
- Pull...
CLICK HERE TO GET FULL ACCESS TO 2001 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 Audi A4 Quattro Avant 2.8 V6 GAS
FRONT
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing arm.
- Remove swing arm to track control arms mounting bolt and push both track control arms up and out, then tilt swing arm away.
- Remove drive axle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 89 ft. lbs.
- Torque wheel hub nut to 280 ft. lbs.
- Torque drive axle flange bolts to 59 ft. lbs.
REAR
- Pull...
CLICK HERE TO GET FULL ACCESS TO 2001 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 Audi A4 Quattro 1.8 L4 GAS
FRONT
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing arm.
- Remove swing arm to track control arms mounting bolt and push both track control arms up and out, then tilt swing arm away.
- Remove drive axle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 89 ft. lbs.
- Torque wheel hub nut to 280 ft. lbs.
- Torque drive axle flange bolts to 59 ft. lbs.
REAR
- Pull...
CLICK HERE TO GET FULL ACCESS TO 2001 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2001 Audi A4 Quattro vehicle. |
Access the Complete guide! |