Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Jeep Wrangler car and truck
repair procedures including Jeep engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Jeep Wrangler automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Jeep Wrangler
- 2001 Jeep Wrangler 2.5 L4 GAS, CID:150, Fuel Injection, Aspiration:150, Engine VIN:, Desg:P
- 2001 Jeep Wrangler 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Grand Cherokee & Wrangler -> Brake System Bleed
Vehicle: 2001 Jeep Wrangler 4.0 L6 GAS
Refer to "Hydraulic Brake... "
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Grand Cherokee & Wrangler -> Precautions -> Brake Bleed -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> Caliper Inspection -> General Precautions
Vehicle: 2001 Jeep Wrangler 2.5 L4 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings. The wheel bearings should be inspected at this time and repacked if necessary.
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective pad is worn or damaged. Inspect and, if necessary, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness o...
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Anti-lock Brakes -> Jeep -> Precautions -> Brake System Pressure Relief -> General Service Precautions
Vehicle: 2001 Jeep Wrangler 4.0 L6 GAS
Brake System Pressure Relief
The normal working pressure of the Anti-Lock Brake System (ABS) is 1600-2100 psi. System pressure must be released prior to servicing any system component. Failure to reduce system pressure will result in personal injury. Release ABS system pressure as follows:
- Turn ignition switch to Off position.
- Apply brakes 45-50 times (until pedal is firm) to reduce system pressure.
General Service Precautions
Obs...
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Anti-lock Brakes -> Jeep -> System Service -> 1997-98 -> 1999-2001 -> Acceleration Sensor/G-Switch -> Brake System Bleed -> Cherokee -> Cherokee & Grand Cherokee -> Cherokee & Wrangler -> Component Replacement -> Controller Anti-Lock Brake (CAB) -> Front Wheel Sensor -> Grand Cherokee -> Hydraulic Control Unit (HCU) -> Rear Wheel Sensor -> Wrangler
Vehicle: 2001 Jeep Wrangler 4.0 L6 GAS
Brake System Bleed
- Ensure brake fluid reservoir is full.
- Bleed anti-lock brake system in the following sequence:
- Master cylinder.
- HCU valve body, opening one line at a time.
- Right rear wheel.
- Left rear wheel.
- Right front wheel.
- Left front wheel.
- Attach bleeder hose to bleeder fitting, then immerse hose in a suitable glass container.
- Loosen bleeder screw 1/2 turn, then depress and hold brake pedal until pedal reaches floor.
- Tighten bleeder fitting only after pedal has bottomed at floor, then release pedal.
- Repeat preceding steps until fluid entering container is free of bubbles. Check brake f...
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Caravan, Town & Country & Voyager -> Combination Valve -> Except Caravan, Town & Country & Voyager -> Fixed Proportioning Valve -> Height Sensing Proportioning Valve -> Hydraulic Control Valves -> Master Cylinder -> Metering Valve
Vehicle: 2001 Jeep Wrangler 4.0 L6 GAS
Master Cylinder
Except Caravan, Town & Country & Voyager
The cylinder body containing the primary and secondary pistons is made of aluminum. The removable fluid reservoir is made of nylon reinforced with glass fiber. The reservoir is the only serviceable component.
The fluid compartments of the nylon reservoir are interconnected to permit fluid level equalization. The equalization feature does not affect circuit separation in the event of a front or rear brake malfunction. The reservoir compartments will retain enough fluid to operate the functioning hydraulic circuit.
Caravan, Town & C...
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Cherokee, Grand Cherokee & Wrangler -> Precautions -> Brake Bleed -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> Caliper Inspection -> General Precautions
Vehicle: 2001 Jeep Wrangler 4.0 L6 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings. The wheel bearings should be inspected at this time and repacked if necessary.
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective pad is worn or damaged. Inspect and, if necessary, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness o...
CLICK HERE TO GET FULL ACCESS TO 2001 Jeep Wrangler BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
