Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 MERCEDES-BENZ SL600 car and truck
repair procedures including MERCEDES-BENZ engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 MERCEDES-BENZ SL600 automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Brake Booster -> Non-Return Valve
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
Non-Return Valve
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Start engine and create 10.9-11.6 psi vacuum by opening and suddenly releasing throttle.
- Turn engine off.
- If vacuum drops more than 2.9 psi in 30 seconds, replace vacuum line.
- Torque vacuum line to 22 ft. lbs.
Brake Booster
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Connect suitable pressure tester at brake caliper.
- Connect Bosch ...
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Less ESP -> With ESP
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
Less ESP
- Connect suitable brake fluid changing tool following tool manufacturer's instructions. Bleed pressure is 29 psi.
- Open righthand rear brake caliper bleed screw and allow approximately 2.7 ounces of brake fluid to flow out without any bubbles.
- Tighten bleed screw to specifications.
- Repeat bleeding procedure at lefthand rear, righthand front and lefthand front calipers.
- On CL55, CL500, CL600, S55, S430, S500 and S600 models, open master cylinder bleed screw and allow brake fluid to flow without any bubbles. Tighten bleed screw to specifications.
- On all models, operate brake p...
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> Parking Brake
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
Parking Brake
- Raise and support vehicle rear.
- On SL55, SL500, SL600, SLK32, SLK230 and SLK320 models, loosen adjusting bolt.
- On all models, remove one wheel bolt on both rear wheels. Light alloy wheels must be removed.
- Turn adjuster until brake shoes contact and it is no longer possible to turn rear wheel, noting the following:
- Use suitable .1772 inc...
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> CL55, CL500, CL600, S55, S430, S500 & S600 -> CLK55, CLK320, CLK430 & CLK500 -> E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
Brake Booster, Replace
E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320
- Remove master cylinder as outlined in "Hydraulic Brake Systems."
- Inspect master cylinder rear piston for leaks. If no leaks are visible, proceed as follows:
- Remove and measure brake fluid in booster.
- If there is more than 3.38 ounces of brake fluid, booster must be replaced.
- Disconnect vacuum line at booster.
- Remove cover below instrument panel.
- Disconnect brake pedal return spring.
- Disconnect pedal locking device and remove pin.
- Remove carrier mounting nuts.
- Remove brake booster. Do not damage ...
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Control Unit -> ASR/ETS/ESP -> Brake System Bleed -> CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500& SL600 -> CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320 -> Component Replacement -> ESP Charging Pump -> ESP Pressurizing Piston Unit -> Front Wheel -> Hydraulic Unit -> Rear Axle -> Speed Sensor
Vehicle: 2001 MERCEDES-BENZ SL600 6.0 V12 GAS
Brake System Bleed
Refer to procedure as outlined in "Hydraulic Brake Systems."
Component Replacement
Hydraulic Unit
ASR/ETS/ESP
CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320
- Turn ignition switch to Off position.
- Disconnect hydraulic lines. Seal lines and connections.
- Remove plastic caps and hydraulic unit.
- Reverse procedure to install. Torque hydraulic lines to 11 ft. lbs.
ABS Control Unit
CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500& SL600
- On E55, E320, E430 and E500 models, disconnect vacuum line.
- On all models, disconne...
CLICK HERE TO GET FULL ACCESS TO 2001 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2001 MERCEDES-BENZ SL600 vehicle.
|
| Access the Complete guide! |
