Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Cadillac Seville car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Cadillac Seville automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Cadillac Seville
- 2002 Cadillac Seville SLS 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:Y
- 2002 Cadillac Seville STS 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:9
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Hydraulic Brake Systems -> General Motors -> Brake System Bleed -> Bleed Sequence -> Hydraulic System Flush -> Manual -> Pressure
Vehicle: 2002 Cadillac Seville STS 4.6 V8 GAS
Manual
Pressure bleeding is recommended for all hydraulic systems. However, if a pressure bleeder is unavailable, use the following procedure. Brake fluid damages painted surfaces. Immediately clean any spilled fluid.
- Remove vacuum reserve by pumping brakes several times with engine off.
- Fill master cylinder reservoir with clean brake fluid. Do not let reservoir fall below half full during bleeding procedure.
- If required, bleed master cylinder as follows:
- Loosen master cylinder forward brake line connection until fluid flows from reservoir, then tighten brake line.
- Have assistant t...
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Brakes Grab -> Hard Pedal/Brakes Inefficient -> Slow Or No Release
Vehicle: 2002 Cadillac Seville SLS 4.6 V8 GAS
Brakes Grab
- Contaminated, worn or faulty brake linings.
- Drum or brake rotor out-of-round.
- Faulty brake booster.
Hard Pedal/Brakes Inefficient
- Contaminated, glazed or faul...
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Caliper Service -> Assemble -> Disassemble -> Replacement
Vehicle: 2002 Cadillac Seville STS 4.6 V8 GAS
Replacement
- Raise and support vehicle.
- Mark relationship of wheel to axle flange, then remove wheel and tire assembly.
- Remove brake hose from caliper, Fig. . Plug openings in caliper and brake hose to prevent fluid loss and contamination.
- Lift up on end of cable spring to free end of cable from lever, then disconnect parking brake cable from lever.
- Remove bolt and washer attaching cable support bracket to caliper body assembly.
- Remove sleeve bolt and caliper body assembly.
- Reverse procedure to install, then bleed brakes.
Disassemble
- Remove caliper from vehicle as outlined under "Caliper S... "
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Hydraulic Brake Systems -> General Motors -> Component Service -> Assemble -> Aurora, Bonneville, Eighty-Eight, LeSabre, Park Avenue & Riviera -> Corvette -> CTS -> Disassemble -> Except Aurora, Bonneville, Corvette, CTS, Eighty-Eight, LeSabre, Park Avenue, Riviera & Vibe -> Master Cylinder Overhaul -> Vibe -> Wheel Cylinder Overhaul
Vehicle: 2002 Cadillac Seville SLS 4.6 V8 GAS
Master Cylinder Overhaul
Except Aurora, Bonneville, Corvette, CTS, Eighty-Eight, LeSabre, Park Avenue, Riviera & Vibe
Disassemble
Refer to Figs. and , when performing the following procedures.
- Disconnect and plug hydraulic lines.
- Remove mounting nuts and master cylinder.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm.
- Remove fluid level switch, if equipped.
- On models equipped with compact master cylinder, remove proportioner valve, Fig. .
- On all models, depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet...
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Anti-lock Brakes -> Delco/Bosch Type 5.3 -> Precautions -> ABS Service
Vehicle: 2002 Cadillac Seville STS 4.6 V8 GAS
ABS Service
Before performing any repairs on the ABS system, note the following precautions:
- Before using electric welding equipment, disconnect EBCM.
- Carefully note routing, position and mounting ABS and TCS wiring, connectors, clips and brackets. ABS and TCS are extremely sensitive to electromagnetic interference.
- Do not use a fast charger when battery is connected. Never disconnect battery from system with engine running.
- Ignition switch must be in Off position when disconnecting EBCM.
- Many ABS system components ...
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Cadillac Seville AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Cadillac Seville cars and light trucks from 1990+.
Power Brake Units -> Precautions
Vehicle: 2002 Cadillac Seville SLS 4.6 V8 GAS
- After disassembling power brake unit, soak metal components in solvent.
- Use only alcohol on components containing rubber. After components have been thoroughly cleaned and rinsed in solvent, they should be washed again in clean alcohol before assembly.
- Use compressed air to blow dirt and cleaning fluid from ...
CLICK HERE TO GET FULL ACCESS TO 2002 Cadillac Seville BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
