Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Daewoo Nubira car and truck
repair procedures including Daewoo engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Daewoo Nubira automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
- Depress brake pedal several times with ignition Off.
- Depress brake pedal and hold in this position.
- Start engine.
- If brake pedal drops after engine starts, booster is operating properly.
- If peda...
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Caliper, Overhaul -> Caliper, Replace -> Disassemble
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
Caliper, Replace
- Raise and support vehicle.
- Mark wheel to hub orientation, then remove wheel and tire.
- Remove brake fluid hose to caliper mounting bolt and washers, then the hose. Plug hose end and caliper port to prevent fluid loss and contamination.
- Remove caliper mounting bolts, then the caliper.
- Reverse procedure to install, noting the following:
- Tighten all nuts and bolts to specifications.
- Bleed brakes as outlined under "Brake System Bleed."
- Do not move vehicle until a firm brake pedal is obtained.
- Depress brake pedal several times to bring pads into contact with rotor.
Caliper, Overh...
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Drum, Replace -> One-Piece -> Two-Piece
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
Drum, Replace
One-Piece
- Raise and support vehicle.
- Remove wheel and tire.
- Remove drum to spindle split pin and castle nut. Discard split pin.
- Remove drum.
- Reverse procedure to install, noting the following:
- Inspect hub bearing, then pack with wheel bearing grease part No. 1051344, or equivalent.
- Inspect drum for scoring and cracks and replace as required.
- Measure drum and compare findings to "Drum Brake Specifications" chart.
- Install brake drum and secure with castle nut.
- On Nubira and 1999-2000 Lanos models, torque castle nut to 15 ft. lbs....
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Brake System Bleed -> Component Replacement -> Front Wheel Speed Sensor -> Hydraulic Unit -> Lanos -> Leganza & Nubira -> Rear Wheel Speed Sensor
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
Brake System Bleed
Replacement modulators are already filled and bled. Air usually will not enter the modulator during normal procedures that require EBCM replacement. Normal bleeding would be required in such cases. Refer to " Brake System Bleed" in the "Hydraulic Brake Systems" section.
If air enters the hydraulic modulator or if a modulator is installed in an unfilled condition, use a suitable scan tool and follow the brake bleeding program prompts. The modulator cannot be bled manually.
Component Replacement
Hydraulic Unit
- Disconnect EBCM electrical connectors.
- Cover connectors and soc...
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
The Anti-Lock Brake System (ABS) improves the control and maneuverability of the vehicle during braking. This is accomplished by controlling hydraulic brake pressure to each brake caliper or wheel cylinder. Anti-lock braking will only occur when th...
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Daewoo Nubira AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Daewoo Nubira cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> Lanos -> Leganza -> Nubira
Vehicle: 2002 Daewoo Nubira 2.0 L4 GAS
Brake Booster, Replace
Lanos
- Disconnect brake master cylinder reservoir electrical connector.
- On models equipped with manual transaxle, disconnect clutch cylinder hose connection at brake fluid reservoir, then plug to prevent fluid leakage and contamination.
- On all models, remove master cylinder mounting nuts.
- Move master cylinder forward slightly and position aside with fluid lines intact. Discard booster housing seal.
- Remove booster vacuum hose.
- Disconnect stop lamp switch.
- Disconnect brake pedal spring.
- Disconnect clip and pushrod pin from brake pedal bracket assembly.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2002 Daewoo Nubira BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Daewoo Nubira vehicle.
|
| Access the Complete guide! |
