Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Lexus IS300 car and truck
repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Lexus IS300 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Lexus IS300
- 2002 Lexus IS300 3.0 L6 GAS, CC:2997, Fuel Injection
- 2002 Lexus IS300 Sportcross 3.0 L6 GAS, CC:2997, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Lexus IS300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Lexus IS300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Rear
Vehicle: 2002 Lexus IS300 3.0 L6 GAS
Rear
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Remove bolt and nut and separate load sensing valve bracket and stabilizer link assembly.
- Remove bolts from suspension member brace.
- Remove bolts and separate parking brake cable.
- Release staked part of axle shaft nut using suitable tool. Release staked part of nut completely or threads of driveshaft may be damaged.
- Apply brake pedal and remove axle shaft nut.
- Remove bolts and separate speed sensor from axle carrier. Use care not to damage speed sensor and prev...
CLICK HERE TO GET FULL ACCESS TO 2002 Lexus IS300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Lexus IS300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Lexus IS300 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Rear
Vehicle: 2002 Lexus IS300 Sportcross 3.0 L6 GAS
Rear
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove engine undercovers.
- Remove rear floor board.
- Remove bolts and nuts securing front exhaust pipe assembly.
- Disconnect heated oxygen sensor.
- Remove five bolts and pipe support bracket, retainer and nut from exhaust manifold.
- Disconnect the exhaust pipe assembly from four rings.
- Remove exhaust pipe assembly.
- Remove two gaskets from exhaust pipe assembly.
- Make a reference mark across driveline and differential companion flange.
- Remove bolts, washer, and nuts from companion flange.
- Remove center suppor...
CLICK HERE TO GET FULL ACCESS TO 2002 Lexus IS300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Lexus IS300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Lexus IS300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Rear
Vehicle: 2002 Lexus IS300 Sportcross 3.0 L6 GAS
Rear
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Remove bolt and nut and separate load sensing valve bracket and stabilizer link assembly.
- Remove bolts from suspension member brace.
- Remove bolts and separate parking brake cable.
- Release staked part of axle shaft nut using suitable tool. Release staked part of nut completely or threads of driveshaft may be damaged.
- Apply brake pedal and remove axle shaft nut.
- Remove bolts and separate speed sensor from axle carrier. Use care not to damage speed sensor and prev...
CLICK HERE TO GET FULL ACCESS TO 2002 Lexus IS300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Lexus IS300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Lexus IS300 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Rear
Vehicle: 2002 Lexus IS300 3.0 L6 GAS
Rear
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove engine undercovers.
- Remove rear floor board.
- Remove bolts and nuts securing front exhaust pipe assembly.
- Disconnect heated oxygen sensor.
- Remove five bolts and pipe support bracket, retainer and nut from exhaust manifold.
- Disconnect the exhaust pipe assembly from four rings.
- Remove exhaust pipe assembly.
- Remove two gaskets from exhaust pipe assembly.
- Make a reference mark across driveline and differential companion flange.
- Remove bolts, washer, and nuts from companion flange.
- Remove center suppor...
CLICK HERE TO GET FULL ACCESS TO 2002 Lexus IS300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
