Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Buick Lesabre car and truck
repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Buick Lesabre automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Buick Lesabre
- 2003 Buick Lesabre Custom 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2003 Buick Lesabre Limited 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
Vehicle: 2003 Buick Lesabre Custom 3.8 V6 GAS
The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Engine Or Service Now Soon Engine Indicator Lamps (Gasoline Engines w/Electronic Engine Controls Or EFI) -> Except LeMans, Metro, Prizm, Storm & Vibe
Vehicle: 2003 Buick Lesabre Limited 3.8 V6 GAS
The Check Engine lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a fault condition and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM memory can be cleared of codes as follows:
On models except Cadillac with DEFI, remove the ECM/PCM fuse or disconnect the battery ground cable for approximately 30...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Air Bag Warning Lamp ->
Vehicle: 2003 Buick Lesabre Custom 3.8 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned on as a bulb check. If the air b...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2000-05 LeSabre -> Reset
Vehicle: 2003 Buick Lesabre Custom 3.8 V6 GAS
Reset
The Low Tire Pressure indicator will turn on when the pressure in one of the tires becomes 12 psi. lower or higher then the other three. The low tire pressure monitor system uses the ABS (Anti-Lock Brake System) wheel speed sensors to determine if a tire is low by a variation in wheel speed.
- Inflate all tires to vehicle manufacturer's specificatio...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Anti-Lock Warning Lamp ->
Vehicle: 2003 Buick Lesabre Limited 3.8 V6 GAS
This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When lamp is lit, turn ignition Off, then restart engine. If l...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Buick Lesabre AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Buick Lesabre cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Low Coolant Lamp ->
Vehicle: 2003 Buick Lesabre Limited 3.8 V6 GAS
This lamp should light when engine coolant level in the radiator drops below a predetermined le...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Lesabre MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Buick Lesabre vehicle.
|
| Access the Complete guide! |
