Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Cadillac CTS car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Cadillac CTS automobile. Try the Automotix DIY solution today!
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Cadillac CTS AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Cadillac CTS cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2003 Cadillac CTS 3.2 V6 GAS
- Disconnect battery ground cable.
- Disconnect air intake duct hose from Mass Air Flow (MAF) and Intake Air Temperature (IAT) sensor.
- Remove intake air resonator to cooling fan attaching bolts.
- Disconnect air intake duct hoses from throttle body then lift intake air resonator from frame.
- Rotate drivebelt tensioner clockwise to release tension.
- Slide drive belt from water pump pulley, allowing tensioner to return and then remove dri...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac CTS STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Cadillac CTS AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Cadillac CTS cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2003 Cadillac CTS 3.2 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle using suitable lift.
- Disconnect HO2S electrical connector at sensor.
- Remove exhaust pipe to lefthand and righthand catalytic converter attaching nuts.
- Lower exhaust and allow to rest on floor panel brace.
- Remove lefthand and righthand converter seal and gasket.
- Remove converter to hanger and then the converter to exhaust manifold attaching nuts.
- Remove righthand catalytic converter.
- Remove starter heat shield bolt and nut, then the starter heat shield.
- Remove starter soleno...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac CTS STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



