Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Cadillac Escalade car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Cadillac Escalade automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Cadillac Escalade
- 2003 Cadillac Escalade 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:N
- 2003 Cadillac Escalade 5.3 V8 GAS, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:T
- 2003 Cadillac Escalade EXT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:N
- 2003 Cadillac Escalade ESV 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:N
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Astro, Bravada, S & T Series & Safari -> Aztek, Rendezvous & Vue -> C & K Series -> Duo-Servo -> Express & Savana -> Installation -> Montana, Silhouette, Trans Sport & Venture -> P Series -> Removal -> Single-Servo -> Tracker
Vehicle: 2003 Cadillac Escalade EXT 6.0 V8 GAS
C & K Series
Duo-Servo
Removal
- Raise and support vehicle.
- Mark relationship of wheel to hub, then remove tire and wheel assembly.
- On models equipped with full-floating axles, remove hub and drum assembly as outlined in. "Drive Axles."
- On models equipped with semi-floating axles, proceed as follows:
- Install pin into park brake lever.
- Mark relationship of drum to axle.
- Remove rear brake drum retainers, as required.
- Remove rear brake drum.
- On all models, remove return springs and shoe guide,. Fig. .
- Remove brake hold down springs and pins.
- Disconnect actuator lever and pivot.
- Remove lever return sp...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2003 Cadillac Escalade 5.3 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Anti-Lock Brakes -> Kelsey-Hayes -> Diagnosis & Testing -> 2002 -> 2002-03 -> 2003-06 -> 2004-06 -> Accessing Diagnostic Trouble Codes -> Astro, Blazer, Jimmy, Safari, Sonoma, SSR & S10 -> Avalanche, Escalade, Escalade EXT, Suburban, Tahoe & Yukon -> Bravada, Envoy, Rainier & Trailblazer -> Clearing Diagnostic Trouble Codes -> Connector Pin Identification -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Express & Savana -> Intermittents & Poor Connections -> Sierra & Silverado -> Symptom Tests -> Temperature Vs. Resistance
Vehicle: 2003 Cadillac Escalade ESV 6.0 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturers instructions.
Diagnostic Trouble Code Interpretation
Astro, Blazer, Jimmy, Safari, Sonoma, SSR & S10
[[table data]]Avalanche, Escalade, Escalade EXT, Suburban, Tahoe & Yukon
2002
[[table data]]2003-06
[[table data]]Bravada, Envoy, Rainier & Trailblazer
2002-03
[[table data]]2004-06
[[table data]]Express & Savana
2002
[[table data]]2003-06
[[table data]]Sierra & Silverado
2002
[[table data]]2003-06
[[table data]]Connector Pin Identification
[[table data]]Diagnostic Tests
Astro, Blazer, Jimmy, Safari, Sonoma, SSR & S10
[[table data]]Avalanche, Escalade, Escalade EXT, Suburban, Tahoe & Yukon
2002
[[table data]]2003-06
[[table data]]Bravada, Envoy, Rai...
[[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> General Service
Vehicle: 2003 Cadillac Escalade ESV 6.0 V8 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, ensure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the brak...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Installation -> Removal
Vehicle: 2003 Cadillac Escalade 6.0 V8 GAS
Removal
- Siphon 2/3 of the brake fluid from master cylinder.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Compress caliper pistons until they bottom in bores using suitable clamp,. Fig. .
- Disconnect brake hose at caliper by removing inlet fitting bolt.
- Remove mounting bolts and caliper.
Inspection
Should it become required to remove the caliper for installation of new components, clean components in denatured alcohol, wipe dry using lint-free cloths. Blow out drilled passages and holes using compressed air. Inspect dust boots for punctures or tears. If punctures or tears ar...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Cadillac Escalade AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Cadillac Escalade cars and light trucks from 1990+.
Anti-Lock Brakes -> Kelsey-Hayes -> System Service -> Brake Pressure Modulator Valve (BPMV) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Front Wheel Speed Sensor -> Manual Bleed -> Pressure Bleed
Vehicle: 2003 Cadillac Escalade ESV 6.0 V8 GAS
Brake System Bleed
Gravity and vacuum bleeding procedures are not recommended for use with the anti-lock brake system. The manual bleed procedure is the preferred method, although pressure bleeding is also possible. Do not pump the brake pedal during the bleeding process, as fluid aeration may occur.
Manual Bleed
- Raise and support vehicle, then connect a clear plastic tube to brake bleed screw at righthand rear wheel.
- Place free end of tube in a glass jar partially filled with clean brake fluid. Ensure end of tube remains submerged in fluid and master cylinder reservoir is kept full.
- ...
CLICK HERE TO GET FULL ACCESS TO 2003 Cadillac Escalade BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
