Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Buick Rainier car and truck
repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Buick Rainier automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Buick Rainier
- 2004 Buick Rainier 4.2 L6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:S
- 2004 Buick Rainier 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:P
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 2004 Buick Rainier 5.3 V8 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Computer Relearn Procedures -> General Motors Corp. -> 1997-98 -> 1998-2000 -> 1998-99 -> 1999-2001 -> 1999-2002 -> 2.2L & 2.4L Engines -> 2000-02 -> 2000-04 -> 2001-02 -> 2001-04 -> 3.1L, 3.4L, 3800/3.8L, 4.0L & 4.6L Engines -> 3.5L Engine -> 5.7L Engine -> Achieva, Alero, Grand Am & Skylark -> Achieva, Cavalier, Skylark & Sunfire -> Alero & Grand Am -> Alero & Malibu -> Aurora -> Aurora, Bonneville, DeVille, LeSabre & Seville -> Aurora, Bonneville, Grand Prix, LeSabre & Park Avenue -> Auto Learn Passlock Procedure -> Body Control Module (BCM) -> Bonneville -> Bonneville, Eighty Eight, LeSabre, LSS & Park Avenue -> C & K Series w/Diesel Engine -> C & K Trucks w/Diesel Engine -> Camaro & Firebird -> Catera -> Cavalier & Sunfire -> Century -> Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo & Regal -> Century, Impala, Intrigue, Monte Carlo & Regal -> Corvette -> Crankshaft Position System Variation Learn -> Cutlass & Malibu -> Dash Integration Module (DIM) -> DeVille -> DeVille, Eldorado & Seville -> EEPROM -> Eldorado -> Engine Control Module (ECM) -> Engine Performance -> Except Park Avenue -> Grand Am -> Grand Prix & Regal -> Impala & Monte Carlo -> Instrument Panel Integration Module (IPM) -> Intrigue -> LeSabre -> Less Tech 2 Or Techline Terminal -> Light Truck & Vans -> Park Avenue -> Passenger Cars -> Passkey Module -> Passlock Learn Procedure -> PCM -> Powertrain Control Module (PCM) -> Powertrain Control Module (PCM) & Vehicle Control Module (VCM) -> Rear Integration Module -> Riviera -> Seville -> T50/T60/T20+ -> TDC Offset Adjustment -> Theft Deterrent System Programming -> VCM -> With Tech 2 -> With Techline Terminal & Scan Tool
Vehicle: 2004 Buick Rainier 4.2 L6 GAS
Passenger Cars
Body Control Module (BCM)
Alero & Grand Am
This procedure must be performed if the BCM, Passlock sensor or PCM is replaced. If BCM is not properly programmed, it will not control all the features properly.
- Ensure battery is fully charged and ignition switch is in the ON position.
- Connect a suitably programmed Tech II, or equivalent, scan tool to Data Link Connector (DLC).
- Access scan tool "Special Functions" menu and follow scan tool instructions to program BCM.
- If BCM fails to accept the pr...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Component Replacement & Adjustment -> Bravada, Envoy, Rainer & TrailBlazer -> Compressor, Replace -> 4.2L Engine -> 5.3L Engine
Vehicle: 2004 Buick Rainier 4.2 L6 GAS
4.2L Engine
- Recover refrigerant as outlined in .
- Relieve tension by turning tensioner arm clockwise enough and remove drive belt.
- Remove air conditioning line mounting bracket bolt at engine life hook.
- Remove mounting bolts and righthand engine lift hook.
- Remove three mounting bolts and alternator.
- Remove bracket mounting bolt and idler pulley.
- Disconnect compressor electrical connectors.
- Remove mounting bolt and compressor hose assembly.
- Remove compressor mounting bolts and compressor, Fig. .
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Component Replacement & Adjustment -> Bravada, Envoy, Rainer & TrailBlazer -> Water Pump, Replace -> 4.2L Engine -> 5.3L Engine
Vehicle: 2004 Buick Rainier 5.3 V8 GAS
4.2L Engine
- Drain coolant into suitable container.
- Remove mounting bolts and radiator support diagonal brace.
- Disconnect Secondary Air Injection (AIR) reaction pump inlet hose from air cleaner air outlet duct.
- Loosen three mounting screws and air cleaner cover/resonator.
- Lift air cleaner element and air outlet duct from lower air cleaner housing/washer solvent tank and position them aside.
- Disconnect windshield washer pump, headlamp washer pump, low solvent level sensor and lift gate washer pump electrical connectors.
- Remove washer...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Computer Relearn Procedures -> General Motors Corp. -> 1997-98 -> 1998-2000 -> 1998-99 -> 1999-2001 -> 1999-2002 -> 2.2L & 2.4L Engines -> 2000-02 -> 2000-04 -> 2001-02 -> 2001-04 -> 3.1L, 3.4L, 3800/3.8L, 4.0L & 4.6L Engines -> 3.5L Engine -> 5.7L Engine -> Achieva, Alero, Grand Am & Skylark -> Achieva, Cavalier, Skylark & Sunfire -> Alero & Grand Am -> Alero & Malibu -> Aurora -> Aurora, Bonneville, DeVille, LeSabre & Seville -> Aurora, Bonneville, Grand Prix, LeSabre & Park Avenue -> Auto Learn Passlock Procedure -> Body Control Module (BCM) -> Bonneville -> Bonneville, Eighty Eight, LeSabre, LSS & Park Avenue -> C & K Series w/Diesel Engine -> C & K Trucks w/Diesel Engine -> Camaro & Firebird -> Catera -> Cavalier & Sunfire -> Century -> Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo & Regal -> Century, Impala, Intrigue, Monte Carlo & Regal -> Corvette -> Crankshaft Position System Variation Learn -> Cutlass & Malibu -> Dash Integration Module (DIM) -> DeVille -> DeVille, Eldorado & Seville -> EEPROM -> Eldorado -> Engine Control Module (ECM) -> Engine Performance -> Except Park Avenue -> Grand Am -> Grand Prix & Regal -> Impala & Monte Carlo -> Instrument Panel Integration Module (IPM) -> Intrigue -> LeSabre -> Less Tech 2 Or Techline Terminal -> Light Truck & Vans -> Park Avenue -> Passenger Cars -> Passkey Module -> Passlock Learn Procedure -> PCM -> Powertrain Control Module (PCM) -> Powertrain Control Module (PCM) & Vehicle Control Module (VCM) -> Rear Integration Module -> Riviera -> Seville -> T50/T60/T20+ -> TDC Offset Adjustment -> Theft Deterrent System Programming -> VCM -> With Tech 2 -> With Techline Terminal & Scan Tool
Vehicle: 2004 Buick Rainier 4.2 L6 GAS
Passenger Cars
Body Control Module (BCM)
Alero & Grand Am
This procedure must be performed if the BCM, Passlock sensor or PCM is replaced. If BCM is not properly programmed, it will not control all the features properly.
- Ensure battery is fully charged and ignition switch is in the ON position.
- Connect a suitably programmed Tech II, or equivalent, scan tool to Data Link Connector (DLC).
- Access scan tool "Special Functions" menu and follow scan tool instructions to program BCM.
- If BCM fails to accept the pr...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2004 Buick Rainier AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2004 Buick Rainier cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 2004 Buick Rainier 4.2 L6 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 2004 Buick Rainier A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Buick Rainier vehicle.
|
| Access the Complete guide! |
