Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Buick Lesabre car and truck
repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Buick Lesabre automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Buick Lesabre
- 2005 Buick Lesabre Custom 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2005 Buick Lesabre Limited 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2005 Buick Lesabre Limited 3.8 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove fuel injector sight shield.
- Release clamp on heater inlet hose using hose clamp pliers J 38185 or equivalent.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2005 Buick Lesabre Custom 3.8 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove fuel injector sight shield.
- Release clamp on heater inlet hose using hose clamp pliers J 38185 or equivalent.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2005 Buick Lesabre Limited 3.8 V6 GAS
- Drain engine coolant into suitable container.
- Remove upper radiator seal.
- Remove upper radiator support bar.
- Disconnect and plug coolant overflow hose from radiator.
- Disconnect upper and lower radiator hoses from radiator and position out of way.
- Remove bolt from transmission oil cooler pipe clip at lower radiator tie bar.
- Remove cooling fans.
- Disconnect transmission fluid cooler lines from radiator using coupling tool No. J41623-B, or equivalent. Position lines aside.
- Disconnect ...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2005 Buick Lesabre Custom 3.8 V6 GAS
- Drain engine coolant into suitable container.
- Remove upper radiator seal.
- Remove upper radiator support bar.
- Disconnect and plug coolant overflow hose from radiator.
- Disconnect upper and lower radiator hoses from radiator and position out of way.
- Remove bolt from transmission oil cooler pipe clip at lower radiator tie bar.
- Remove cooling fans.
- Disconnect transmission fluid cooler lines from radiator using coupling tool No. J41623-B, or equivalent. Position lines aside.
- Disconnect ...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2005 Buick Lesabre Limited 3.8 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water pump housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from water pump housing and from vehicle.
- Reverse...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Buick Lesabre AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2005 Buick Lesabre cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2005 Buick Lesabre Custom 3.8 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water pump housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from water pump housing and from vehicle.
- Reverse...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Lesabre RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Buick Lesabre vehicle.
|
| Access the Complete guide! |
