Auto Parts Search
We have info for following modifications of 2006 Jeep Commander
- 2006 Jeep Commander 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2006 Jeep Commander 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2006 Jeep Commander Limited 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2006 Jeep Commander Limited 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:2
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Jeep Commander Limited 5.7 V8 GAS
- With vehicle in neutral, position vehicle on hoist.
- Remove half shaft hub/bearing nut.
- Remove wheel speed sensor nut from hub/bearing and remove sensor.
- Remove brake calipers bolts and remove calipers from caliper adapters.
- Remove lower stabilizer link bolt from control arm.
- Remove outer tie rod end nuts and separate tie rods from knuckles with remover tool No. 8677, or equivalent.
- Remove upper ball joint nuts and separate ball joints from knuckles with remover tool No. 8677, or equivalent.
- Remove shock clevis bolt and nut from lower control arm.
- Lean knuckle out and push half sh...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Jeep Commander 3.7 V6 GAS
Front
- With vehicle in neutral, position vehicle on hoist.
- Mark a line across axle pinion flange, propeller shaft, flange yoke and transfer case for installation reference.
- Support transmission and transmission crossmember.
- Remove propeller shaft from transfer case flange.
- Remove propeller shaft from axle pinion flange.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque axle flange bolts to 80 ft. lbs.
- Torque transfer case flange bolts to 24 ft. lbs.
Rear
- With vehicle in neutral, positio...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2006 Jeep Commander 3.7 V6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Jeep Commander Limited 5.7 V8 GAS
Front
- With vehicle in neutral, position vehicle on hoist.
- Mark a line across axle pinion flange, propeller shaft, flange yoke and transfer case for installation reference.
- Support transmission and transmission crossmember.
- Remove propeller shaft from transfer case flange.
- Remove propeller shaft from axle pinion flange.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque axle flange bolts to 80 ft. lbs.
- Torque transfer case flange bolts to 24 ft. lbs.
Rear
- With vehicle in neutral, positio...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Jeep Commander 4.7 V8 GAS
- With vehicle in neutral, position vehicle on hoist.
- Remove half shaft hub/bearing nut.
- Remove wheel speed sensor nut from hub/bearing and remove sensor.
- Remove brake calipers bolts and remove calipers from caliper adapters.
- Remove lower stabilizer link bolt from control arm.
- Remove outer tie rod end nuts and separate tie rods from knuckles with remover tool No. 8677, or equivalent.
- Remove upper ball joint nuts and separate ball joints from knuckles with remover tool No. 8677, or equivalent.
- Remove shock clevis bolt and nut from lower control arm.
- Lean knuckle out and push half sh...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Jeep Commander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Jeep Commander cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2006 Jeep Commander 4.7 V8 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Commander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Jeep Commander vehicle. |
Access the Complete guide! |