Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Jeep Wrangler car and truck
repair procedures including Jeep engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Jeep Wrangler automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Jeep Wrangler
- 2006 Jeep Wrangler SE 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler SE 2.4 L4 GAS, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:1
- 2006 Jeep Wrangler Sport 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler X 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler Rubicon 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler Unlimited 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler Unlimited Rubicon 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2006 Jeep Wrangler 65TH Anniversary Edition 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve -> Park Brake Cable Tensioner -> Stop Lamp Switch
Vehicle: 2006 Jeep Wrangler X 4.0 L6 GAS
Height Sensing Proportioning Valve
On these models the proportioning valve is not adjustable. Do not attempt to make adjustments.
Stop Lamp Switch
- Push and hold brake pedal in applied position.
- Push switch forward until fully seated against bracket.
- Release brake pedal.
- Lightly pull brake pedal rearward until master cylinder pushrod bottoms against master cylinder internal stop. This action will set switch plunger at proper stroke length.
Park Brake Cable Tensioner
Tensioner adjustment is only required when the tensioner, or a cable has been replaced or disconnected for service. To avoid fa...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Caravan, Town & Country & Voyager -> Except Caravan, Town & Country & Voyager -> Master Cylinder
Vehicle: 2006 Jeep Wrangler Unlimited 4.0 L6 GAS
Master Cylinder
Except Caravan, Town & Country & Voyager
- With engine off, pump brake pedal five times to deplete vacuum in brake booster.
- Siphon fluid from brake reservoir.
- On Wrangler models, remove evaporative canister.
- On PT Cruiser models, remove air cleaner housing, then disconnect power distribution center and position aside.
- On all models, disconnect low fluid switch electrical connector.
- Remove brake lines from master cylinder.
- Remove master cylinder mounting nuts.
- On Durango models with ESP, remove inner fender well, then remove integrated power module (IPM) fasteners and ...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Troubleshooting -> Brake Chatter -> Brake Drag -> Brake Fade -> Brake Pull -> Brake Squeal Or Squeak -> Hard Pedal Or High Pedal Effort -> Low Pedal -> Pedal Falls Away -> Pedal Pulsation -> Rear Brake Grab Or Pull -> Spongy Pedal
Vehicle: 2006 Jeep Wrangler Sport 4.0 L6 GAS
Pedal Falls Away
- System leak at brake line, fitting, hose or caliper/wheel cylinder.
- Internal leakage in master cylinder caused by worn or damaged piston cups.
- Internal leak in ABS or RWAL system.
Low Pedal
- Worn brake linings.
- Worn drums or rotors.
- Rear brakes out of adjustment.
Spongy Pedal
- Air in hydraulic system.
- Thin brake drums.
- Substandard brake lines and hoses.
Hard Pedal Or High Pedal Effort
- Linings that are water soaked, contaminated or glazed.
- Faulty power booster or check valve.
Pedal Pulsation
- Disc brake rotors have excessive lateral runout or thickness variation.
- Out of round brake ...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Description
Vehicle: 2006 Jeep Wrangler Unlimited 4.0 L6 GAS
These vehicles are equipped with dual piston calipers, sliding single piston systems, single non-metallic calipers, floating caliper-single piston or single piston caliper mounted disc brake systems.
Upon brake application, fluid pressure exerted against the caliper piston increases equally in all directions, creating the same pressure in the caliper bore and on the piston.
Press...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve -> Park Brake Cable Tensioner -> Stop Lamp Switch
Vehicle: 2006 Jeep Wrangler Unlimited Rubicon 4.0 L6 GAS
Height Sensing Proportioning Valve
On these models the proportioning valve is not adjustable. Do not attempt to make adjustments.
Stop Lamp Switch
- Push and hold brake pedal in applied position.
- Push switch forward until fully seated against bracket.
- Release brake pedal.
- Lightly pull brake pedal rearward until master cylinder pushrod bottoms against master cylinder internal stop. This action will set switch plunger at proper stroke length.
Park Brake Cable Tensioner
Tensioner adjustment is only required when the tensioner, or a cable has been replaced or disconnected for service. To avoid fa...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Caravan, Town & Country & Voyager -> Commander -> Dakota & Durango -> Disassemble -> Front -> Full Size Pickup -> Grand Cherokee, Liberty & Wrangler -> Inspection -> Installation -> Pacifica -> PT Cruiser -> Rear -> Removal -> Sprinter
Vehicle: 2006 Jeep Wrangler SE 4.0 L6 GAS
Caravan, Town & Country & Voyager
Refer to for caliper replacement procedures.
Disassemble
- Remove caliper from adapter and rotor as outlined under . Do not disconnect brake hose from caliper. Support caliper at all times to prevent brake hose damage.
- Position caliper away from rotor to prevent brake fluid spillage on machined surface, then place a small block of wood between caliper fingers to prevent piston damage during removal.
- Gently depress brake pedal to force caliper piston out of bore, then secure brake pedal at any position below one inch of pedal travel to prevent master cy...
CLICK HERE TO GET FULL ACCESS TO 2006 Jeep Wrangler BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
