Auto Parts Search

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Lexus LS430 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Lexus LS430 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Lexus LS430 4.3 V8 GAS
- Discharge fuel system pressure.
- Position vehicle on lift and ensure transaxle is in neutral position.
- Disconnect battery ground cable. After removing battery ground cable wait 90 seconds to prevent air bag and seat belt pretensioner activation.
- Drain engine coolant from radiator. Drain coolant into clean suitable container and plug end of hose. Never open radiator cap when engine is hot. Coolant under pressure when hot can scald skin and get into eyes. Wait for engine to cool before opening radiator cap.
- Remove nuts securing v-bank cover.
- Remove clips securing cool air intake duct s...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus LS430 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Lexus LS430 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Lexus LS430 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Lexus LS430 4.3 V8 GAS
- Disconnect battery ground cable. After removing battery ground cable wait 90 seconds to prevent air bag and seat belt pretensioner activation.
- Raise vehicle on suitable lift.
- Remove clips securing cool air intake duct seal.
- Remove bolt from air inlet and remove air inlet.
- Remove air cleaner assembly by loosing hose clamps then remove intake air connection pipe.
- Remove nuts securing v-bank cover.
- Remove bolts securing engine under cover.
- Rotate or lift belt tensioner arm counterclockwise using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus LS430 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |