Auto Parts Search
2006 MERCEDES-BENZ S600 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT MERCEDES-BENZ REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
FUEL FILTER REPLACEMENT PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Mercedes-Benz -> Fuel Filter Replacement -> Except 2003-06 E320 & E500 Sedans Less 4 Matic & 2004-06 E Series w/Gasoline Engines -> Fuel System Pressure Relief -> Removal & Installation
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
Fuel System Pressure Relief
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental fuel spray.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while it relearns its adaptive strategy.
- Ensure t...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
- Raise and support vehicle.
- Remove twelve-point collared nut from rear axle shaft.
- Remove rear wheel.
- Remove right muffler.
- Remove exhaust pipe at flange.
- Remove rear axle shafts from connecting flange To prevent wheel bearing damage vehicle must not be moved on its wheels with rear axle shaft removed. Bring rear axle shaft into a position which is roughly horizontal, push together and remove downwards at an angle from connecting ...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Component Replacement -> Control Module -> Sensor
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
Control Module
- Read out variant coding of TPMS (RDK) control module (N88). To do this connect STAR DIAGNOSIS and transfer data of TPMS (RDK) control module (N88) to STAR DIAGNOSIS.
- Move passenger seat into rearmost position.
- Remove floor mat and lift back floor covering in passenger foot well, Fig. .
- Remove impact absorber.
- Unscrew plastic nuts and remove step plate.
- Unlock electrical connector and unplug connector from TPMS (RDK) control module (N88).
- Unscrew bolt (6) and pull TPMS (RDK) control module (N88) out of retaining clamp.
- Reverse procedure to install, activate TPMS sele...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Starter, Replace
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
- Disconnect battery ground cable.
- Remove engine cover.
- Disconnect right HO2S electrical connectors.
- Raise and support vehicle.
- Remove fasteners and sound insulator panels.
- Remove heat shield under right catalytic converter.
- Remove bolts and clamps, then disconnect right catalytic converter from turbocharger.
- Remove bolts and converter bracket at right side of transmission.
- Disconnect right catalytic converter at exhaust pipe clamp and flange.
- Loosen bolt for right catalytic converter bracket, then remove bolts and heat shield.
- Remove protective cap and discon...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Cabin Air Filter Service -> Mercedes-Benz -> 1996-2002 E Class & 2000-06 CL & S Class
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
On 1996-2005 models, under normal operating conditions the cabin air filter should be replaced every 15,000 miles. In dusty areas change the cabin air filter more often.
On 2006 models except AMG, under normal operating conditions the cabin air filter should be replaced every 24 months or 26,000 miles. In dusty areas change the cabin air filter more often.
On 2006 AMG models, under normal operating conditions the cabin air filter should be replaced every 24 months or 30,000 miles. In dusty areas change the cabin air filter ...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Mercedes-Benz -> Brake Assist System (BAS)/Acceleration Slip Regulation (ASR) Or Brake Assist System (BAS)/Electronic Stability Program (ESP) Warning Lamp ->
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
The Brake Assist System (BAS)/Acceleration Slip Regulation (ASR) or Brake Assist System (BAS)/Electronic Stability Program (ESP) warning lamp, will illuminate when the ignition switch is placed in the On position to indicate the warning lamp is operational. The lamp should go off when the engine is started. If the warning lamp remains on after the engine has been started or has come on while driving the vehicle, a fault in the BAS, ASR or ESP h...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition clamp on heat exchanger feed pipe and remove hose.
- Reposition clamp on engine and remove hose.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS
- Open engine hood.
- Remove front engine cover.
- Remove left and right air intake air ducts to air filter.
- Remove fan shroud clamps from radiator.
- Remove bolts from fan shroud brackets.
- Disconnect electrical connector from fan shroud, then remove and discard cable tie.
- Disconnect and ATF oil lines from radiator, plug lines and fittings.
- Remove coolant line bracket under fan shroud.
- Unhook fan shroud from radiator supports and remove upw...
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
Component location diagrams for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. from 1990+.
Rear Wheelhouse Diagram for 2006 MERCEDES-BENZ S600 5.5 V12 GAS Components on diagram: |
Left Front Seat Diagram for 2006 MERCEDES-BENZ S600 5.5 V12 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
OEM drawn wiring diagrams for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S.
2006 MERCEDES-BENZ S600 5.5 V12 GAS Wiring Diagram Components on diagram: |
2006 MERCEDES-BENZ S600 5.5 V12 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
OEM TSB listings for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. from 1985+.
Document: Re-code the Software Calibration Number (SCN) Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS Auto Systems: |
Document: Maintenance Systems Overview Vehicle: 2006 MERCEDES-BENZ S600 5.5 V12 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2006 MERCEDES-BENZ S600 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2006 MERCEDES-BENZ S600 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2006 MERCEDES-BENZ S600 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 MERCEDES-BENZ S600 vehicle. |
Access the Complete guide! |